Trade, shipping & packaging tools

Ship on the right numbers.

Research tariff data, estimate landed and dimensional cost, validate a tracking-number format, plan carton packout, and convert thermal-label dimensions.

Advertisement

Trade, shipping and packaging tools

Tariff treatment, divisors, rounding, minimums, surcharges, printer limits, and carton requirements can vary by service, equipment, and date. Confirm the shipment-specific rule before acting.

Worked example: one carton, three tools

Take a carton measuring 24 × 18 × 12 inches that weighs 10 lb. That is 5,184 cubic inches. Under the USPS rule (over 1,728 cubic inches, divide by 139, round up) and the FedEx rule (139 cubic inches per pound) the dimensional weight is 5,184 ÷ 139 = 37.29, rounded up to 38 lb, so the carton is billed as 38 lb rather than 10 lb: use the dimensional weight calculator. The same carton is 61 × 46 × 30.5 cm, or 0.085 CBM, which you can check in the CBM and chargeable weight calculator; 100 of them are 8.5 CBM. To see how many fit in a 40 ft high cube, use the container load calculator.

Frequently asked questions

What do the shipping tools on this page cover?

Parcel dimensional weight, freight volume and chargeable weight, container and pallet loading, trucking compliance checks such as USDOT and hours of service, and label and packing utilities.

Are the rates and limits current?

Each tool names its sources and the date it was retrieved. Carriers revise prices and rules, so confirm with the carrier before relying on a figure.

Does anything I type leave my browser?

The calculators run in your browser. They do not ask for personal data and do not submit your numbers anywhere.

Sources and as-of date

Retrieved 2026-10-26.

Each tool in this section lists its own sources and as-of date; the three above back the worked example. Carrier rules change, so check the carrier before billing or quoting.

Advertisement
Advertisement