Shipping & Labels · Free

Printable return address labels, a full sheet of 80.

Type your address once and download a PDF that repeats it on every label of an Avery 5167 or 5160 sheet. Built in your browser, nothing uploaded.

Print one address on a whole sheet

Return address labels are the same few lines repeated, so the job is fitting them onto a small label and filling every position. This page does that for Avery 5167, the 80-up sheet of half-inch by 1-3/4 inch labels, and for the 5160 and 8160 30-up sheets. Type your name and address, choose how many labels you want, and download a Letter PDF that you print on blank label stock. Everything happens in your browser, so a home address never has to be typed into a service that keeps it.

The text is fitted to the label for you. The tool starts at your chosen maximum size and steps down in quarter-point increments until the longest line fits the width and all lines fit the height, with a small padding so nothing touches the edge of the label. If the address cannot fit at 5 pt, lines are shortened with three dots and the result panel says so rather than silently printing something unreadable. You can bold the first line, which usually helps the name stand out on a tiny label, and align the text left or centred.

The 80-up Avery 5167 layout

LayoutLabel (w x h)GridLeft / top marginPitch across / down
Avery 51671.75" x 0.5"4 x 20 = 800.3" / 0.5"2.05" / 0.5"
Avery 51602.625" x 1"3 x 10 = 300.1875" / 0.5"2.75" / 1"

The 5167 has four columns and twenty rows. Columns start every 2.05 inches, which leaves a 0.30 inch gap between labels, and rows follow each other every half inch with no gap. The first label sits 0.3 inch from the left edge and 0.5 inch from the top, and the last, number 80, starts 6.45 inch across and 10 inch down and ends exactly 0.5 inch above the bottom of the page. Sizes and counts are from Avery's 5167 page; margins and pitch were measured from its blank PDF template at 300 dpi and are good to about 0.01 inch.

Worked example

The sample address has three lines: Jane Public, 12 Elm Street and Springfield IL 62704. On a 5167 label the usable box is 1.67 by 0.42 inch, and the tool finds that 8.75 pt is the largest size at which the widest line and three lines of height both fit. Filling the sheet produces 80 identical labels on one page. If you tick Skip and enter 12 because the first twelve labels are gone, the page holds 68 labels starting at the first column of the fourth row. On a 5160 label the same text prints at 10 pt, more than twice the readable size, because the label is twice as tall and 1.5 times as wide.

Printing

Print at 100% on Letter paper with Fit to page off. Because the 5167 labels are only half an inch tall and touch vertically, an error of one-sixteenth of an inch moves text to the next label, so the calibration page matters more here than on larger sheets: print it on plain paper, check that its 5 inch line measures 5 inches, then hold it over a blank sheet to the light. If the outlines drift down the page the printer is scaling.

Common mistakes

What it does not do

It does not look up or validate addresses and does not make any claim about what Canada Post, USPS or a courier will accept. It does not print logos, images or colours, and it is not a substitute for Avery's own design software if you want artwork. It does not remember your address: the page forgets everything when you close it.

Where your data goes

The address you type stays in the page. jsPDF, a JavaScript library running in your browser, draws the text into a PDF and the browser hands you the file from a temporary blob address. Your address never leaves the frame it is typed into: the frame is sandboxed and its content security policy permits only blob and data addresses, which rules out a request to a server. Advertising is placed outside the frame. Nothing is written to cookies or storage.

Common mix-ups

  1. Avery template 5167: return address labels
  2. USPS Publication 28, section 222: Punctuation

Checked against these sources on .

FAQ

How many lines fit on an Avery 5167 label?

The label is half an inch tall, so three short lines is the practical limit: your three-line sample prints at 8.75 pt there. Four lines force the type down toward 5 pt, which is hard to read; the tool will shrink it and warn you if it has to shorten a line.

Can I use a 30-up Avery 5160 sheet instead?

Yes. The same address is repeated across the 5160's 1 inch by 2-5/8 inch labels and can print larger: the sample prints at 10 pt there. Choose Custom sheet for any other brand.

Does it fill the whole sheet automatically?

Yes. "Fill the sheet" repeats the address for every remaining position, or you can enter an exact number. If you skip some positions on a partly used sheet, the fill count drops by that many.

Why does my printed text look cut off at the edge?

Most printers cannot print within about a quarter of an inch of the paper edge on some sides, and a print dialog that scales the page moves every label. Set 100% or Actual size, run the calibration page, and keep important text in the middle of the label.

Is my address stored or sent anywhere?

No. The text you type stays in the page, the PDF is built in your browser, and the tool frame is sandboxed without network access.

Can I add a logo or a second font?

No. Labels use one built-in sans-serif font in black, with an optional bold first line. A logo needs an image editor or a design tool such as Avery's own.

Which character sets work?

Latin-1, which covers English and French accents. Other scripts are replaced with a question mark and flagged in the results.

Sources

Retrieved 2026-11-11: Avery template pages and USPS Publication 28 section 222.

Advertisement
Advertisement