Shipping & Labels · Free
4x6 shipping label, cropped from your PDF.
Crop, scale and rotate a carrier PDF or image onto a 4 x 6 inch page, or true-size onto a Letter sheet. Your label never leaves your browser.
Turn a carrier PDF into a 4 x 6 label page
A thermal label printer takes a roll of 4 by 6 inch labels (101.6 by 152.4 mm), and the printer driver expects a page that size. The PDFs that carriers, marketplaces and shipping software hand you are often a Letter or A4 page with the label in the top-left quarter or the top half. Printing that page straight to a thermal printer either scales it down into a tiny label or prints blank space. This formatter cuts out the label region, scales it to fit the 4 x 6 page and rotates it if the label is sideways, so that what comes out of the printer is the label at full size.
You can drop in several files at once and each page becomes one label. Choose the part of the source page that holds the label, an optional margin and a rotation, then pick the output: one label per 4 x 6 inch page, which is what a roll printer wants, or true-size 4 x 6 labels two to a Letter sheet. The result table lists every label with the scale factor applied, so you can see at a glance that a label that should be 100% is not being shrunk to 60%.
Regions of the source page
| Region | Part of the source page kept | On a Letter page (points) |
|---|---|---|
| whole | 100% wide x 100% tall | 0, 0 to 612, 792 |
| top-half | 100% wide x 50% tall | 0, 396 to 612, 792 |
| bottom-half | 100% wide x 50% tall | 0, 0 to 612, 396 |
| left-half | 50% wide x 100% tall | 0, 0 to 306, 792 |
| right-half | 50% wide x 100% tall | 306, 0 to 612, 792 |
| top-left | 50% wide x 50% tall | 0, 396 to 306, 792 |
| top-right | 50% wide x 50% tall | 306, 396 to 612, 792 |
| bottom-left | 50% wide x 50% tall | 0, 0 to 306, 396 |
| bottom-right | 50% wide x 50% tall | 306, 0 to 612, 396 |
Regions are fractions of the page, measured from the bottom-left corner as PDF does. The crop is a clip box, not a re-render: pdf-lib embeds the original page and the part outside the box is simply not drawn. Because PDF page content stays as vector text and bars, a barcode that was crisp in the source stays crisp. Image files cannot be clipped that way, so they are cropped on a canvas and embedded as pixels.
Sizes that matter
A 4 x 6 inch page is 288 by 432 points. At 203 dpi, the common desktop thermal resolution, that is 812 by 1218 dots; at 300 dpi it is 1200 by 1800 dots. The thermal label dots calculator converts any label size using the native printhead profiles, which is useful if you need to write ZPL or set a label size in a driver. This tool does not produce ZPL or any printer language; it produces a PDF.
Worked example
You download a Letter PDF from a marketplace and the label occupies the top half, 612 by 396 points and landscape. Choose the top-half region with rotation automatic and output 4 x 6. The tool sees a landscape source and a portrait page, turns the label 90 degrees counter-clockwise and scales it to fit: 71% (the 432 point page height divided by the 612 point label width is the limit), so the label ends up 3.88 by 6.00 inches on a 4 by 6 inch page. If the label sits in the top-left quarter only, 306 by 396 points, choose top-left instead: no rotation is needed and the scale is 94%. The result table prints the scale for every label, so a label that should be near full size does not quietly shrink to a thumbnail.
Printing
Choose the thermal printer, set the paper size to 4 x 6 inch, and print at 100% or Actual size. A driver set to Fit to page will rescale a page that is already the right size and may add margins, and a driver that auto-rotates can turn the label twice. Print one label and scan the barcode before you run a batch.
Common mistakes
- Selecting the whole page when the label is only a quarter of it; the label then shrinks to a quarter-size thumbnail.
- Using a screenshot or a phone photo instead of the original PDF. Pixels cannot be scaled up cleanly.
- Letting both this tool and the printer driver rotate the label.
- Cropping tight to the barcode. Barcodes need blank space around them to scan, so leave the margin the carrier gave you.
What it does not do
It does not read or change label content, check a tracking number, buy or void postage, or confirm that a carrier will accept a reformatted label. It does not detect where the label is on the page for you, it does not output ZPL or EPL, and it does not handle password-protected PDFs. For international parcels, customs forms printed on the same page are cropped away unless you keep them in the region.
Where your files go
Each file is read into memory by your browser. pdf-lib, a JavaScript library on the page, copies the chosen part of each page into a new PDF, and the browser hands you the result from a temporary blob address. The frame holding the tool is sandboxed by the browser and cannot make network requests (its content security policy allows only blob and data addresses), and the advertising on this page cannot see inside it. Close the tab and the values are gone; nothing is saved.
Common mix-ups
-
Often assumedA 4 x 6 inch PDF page is always exactly 288 x 432 units.
What the source saysThat holds for the default user space unit of 1/72 inch. The PDF 1.6 UserUnit entry can change the unit size, and the specification says support for values other than 1.0 is implementation-dependent. [1]
Checked against these sources on .
FAQ
Why is my carrier label on a Letter page?
Many carriers and marketplaces export a Letter or A4 PDF with the label in one corner or the top half, because they assume a desktop printer. A 4 x 6 inch thermal printer wants a page of exactly that size. This tool crops the label region and puts it on a 4 x 6 page. Some platforms can produce a 4 x 6 PDF directly, for example Shippo lists a PDF_4x6 option, so check that first.
Does the label stay sharp and scannable?
PDF input is kept as vector content, not rasterised: the cropped page is embedded as is and scaled. Image input (PNG, JPG and others) keeps its pixels, so a small screenshot printed at 4 x 6 will look soft. The result table shows the scale applied to every label; if it is far from 100%, test-scan the printed barcode before you ship.
Where on the page is my label?
The tool cannot know. Choose the region of the source page that contains the label: whole page, a half or a quarter. Anything outside that region is cut away. Check the downloaded PDF before printing, and use the margin box if the label edge is clipped.
What does rotate "automatic" do?
If the cropped region is landscape and the output page is portrait, or the reverse, it turns the label 90 degrees counter-clockwise so it fills the page. You can force no rotation, or 90 degrees clockwise or counter-clockwise.
What is the Letter output option for?
It places 4 x 6 inch labels at true size, two per Letter sheet side by side near the top, for printing on a regular printer and cutting or using half-sheet label stock. It is not a thermal-roll format.
Are my labels uploaded?
No. The files are read in your browser, pdf-lib builds the new PDF there, and the tool frame is sandboxed without network access. A shipping label holds a name, address and tracking number, which is why nothing is sent anywhere.
Does this change the label or make it carrier approved?
No. It only crops, scales and rotates pages; the label content is untouched. It does not buy postage, void labels or talk to any carrier, and a label that was valid before is no more or less valid after.
My PDF is password protected. Why does it fail?
The tool cannot open encrypted PDFs and will say so. Remove the password in the program that created it, or print the label to a new PDF first.
Sources
Retrieved 2026-11-11: the page-box and UserUnit definitions in ISO 32000-1.
- Shippo: shipping label sizes: lists 4 x 6 inch (102 x 153 mm) PDF as a standard label format (fetched 20 Oct 2026).
- pdf-lib: the MIT-licensed library that embeds and clips PDF pages in your browser (fetched 20 Oct 2026).
- MDN: FileReader: how the browser reads a file you choose without sending it anywhere (fetched 20 Oct 2026).
- MDN: iframe and the sandbox attribute: how a sandboxed frame without allow-same-origin is isolated from its parent page (fetched 20 Oct 2026).