Print prep · local file
Image DPI checker.
Choose an image from this device to inspect its pixels and print density. The file is read locally in your browser and never uploaded.
How to check an image's print size
- Choose a PNG, JPEG or GIF from your device.
- Enter the target width and height in inches if you have a specific print in mind.
- Press Check print size to see the pixel dimensions, any DPI recorded in the file and the largest sizes the image supports at 300 and 150 DPI.
Pixels matter more than the DPI tag
The DPI number stored inside a file is only a suggestion to software, and many programs ignore it or reset it. What decides print quality is how many pixels you have for each inch of paper. Divide the pixel width by the inches you want to print: a 1800 pixel edge gives 300 DPI at 6 inches or 150 DPI at 12 inches. Labs typically ask for 300 DPI for close viewing and accept 150 DPI for large pieces seen from a distance.
If the effective resolution is too low, the print will look soft or blocky, and enlarging the file without new detail does not fix that. Go back to the original, or choose a smaller print size.
Read locally
The file is inspected by your browser in a frame with no network access, so nothing is uploaded. The tool reads standard density fields from PNG and JPEG when present, but the print calculation uses the pixel size. The advertising on this page is outside the frame.
- Always confirm the exact requirements with your printer before production.
- Canvas wraps and bleed areas need extra pixels beyond the visible picture.
How to check the DPI of an image
Choose the file and read the report. The checker shows any PNG pHYs or JPEG JFIF density stored in the file, but the number that decides print sharpness is effective DPI = pixels / print inches. A 2400 x 3000 px image at 8 x 10 in is exactly 300 x 300 DPI; the same file stretched to 11 x 14 in is about 218 x 214 and misses a 300 DPI target. A GIF has no density field, so it shows "Not present", and a 72 DPI label on a web download does not mean the image is low quality. For canvas sizes use the photo to canvas print calculator.
Pixels are the reliable baseline
Embedded DPI metadata is often missing or ignored by design software. The useful question is how many pixels you have at the physical size you plan to print: effective DPI = pixels ÷ inches. At 300 DPI, a 1800-pixel edge supports 6 inches; at 150 DPI it supports 12 inches.
For canvas prints, the photo to canvas print calculator adds the aspect-ratio crop and gallery wrap.
This checker reads common PNG pHYs and JPEG JFIF density metadata when present, but its target-size calculation is based on pixel dimensions. Confirm the printer’s own resolution requirements before production.
DPI, PPI and what an image file really stores
People search for a “DPI checker” but usually need two different answers. The first is how many pixels the file contains, which never changes unless you resample it. The second is the density number saved in the file’s metadata, which is only a hint about the size the creator intended. Strictly, PPI (pixels per inch) describes how many image pixels land on each inch of a given output size, while DPI (dots per inch) describes the dots a printer lays down. In everyday use the two words are mixed up, and this page reports a single effective density in both cases.
Where a density is stored at all, the format decides how. A PNG may carry a pHYs chunk holding pixels per unit on the X and Y axes plus a unit specifier; when the specifier is 1 the unit is the metre, so this checker multiplies by 0.0254 to get inches (a stored 11,811 pixels per metre becomes about 300 DPI). A JPEG may carry JFIF density fields; the checker reads inches directly and converts centimetre units with a factor of 2.54. A GIF has no density field, so the report shows “Not present”. Many files have no density metadata at all, and many editors write 72 by default, which says nothing about quality.
The formula that actually decides print quality
Effective density equals pixels divided by inches. Nothing else matters for sharpness at a given output size. The fields in the report apply the formula both ways:
- Maximum print size: divide each pixel dimension by the target density. A 4000 × 3000 px photo prints at 13.33 × 10 in at 300 DPI, or 26.67 × 20 in at 150 DPI.
- Effective density for a chosen size: divide pixels by the inches you plan to print. A 2400 × 3000 px file at 8 × 10 in is exactly 300 × 300. The same file stretched to 11 × 14 in is about 218 × 214, which fails a 300 DPI target on both edges.
- Weakest edge wins: the pass or fail line compares the lower of the two densities with 300, because a print is only as sharp as its coarsest direction.
Why changing the DPI number does not add detail
Relabelling a 1800 × 1200 px image from 72 to 300 DPI in an editor changes the declared size from 25 × 16.67 in to 6 × 4 in. The pixels are identical, so the picture is no sharper. Software that “resamples” to a higher density invents pixels by interpolation, which enlarges the file without recovering detail. If the numbers in the report say the image is too small for your print size, the honest fixes are to print smaller, shoot or export larger, or accept a softer result for artwork viewed at a distance.
Choosing a target
300 DPI is the usual figure printers and self-publishing platforms quote for continuous-tone images; Amazon KDP, for example, states a minimum of 300 DPI for the images in a paperback interior and cover. The tool also shows 150 DPI because large posters and banners are often viewed from further away and some printers accept lower densities, but that is a judgment to confirm with your printer, not a published rule. Always follow your printer’s own specification when it differs.
Common mistakes
- Trusting the 72 DPI label on a web download. A 3000 px image labelled 72 DPI is still 3000 px and may print well at 10 in.
- Forgetting the crop. If your target shape differs from the photo’s aspect ratio, cropping removes pixels from one edge; enter the target size you will actually print, not the original proportions.
- Ignoring bleed. Artwork that runs to the page edge needs extra pixels beyond the trim, so check the bleed-inclusive size (see the print bleed and safe-area calculator).
- Screenshots and social images. They are typically small in pixels and rarely survive large prints, whatever their metadata says.
What this checker does not do
It reads PNG, JPEG and GIF headers only. It does not inspect WebP, HEIC, TIFF, PDF or RAW files, does not read colour profiles or CMYK, does not judge focus, noise or compression artefacts, and does not upload anything: the file is parsed in your browser. For sizing and cropping before export, try the resize-to-fit calculator or the crop-to-aspect-ratio calculator.
Frequently asked questions
What is the difference between DPI and PPI?
PPI (pixels per inch) describes how densely an image’s pixels are spread across a given output size, while DPI (dots per inch) describes the dots a printer places on paper. People use the words interchangeably, and for a file check the useful number is pixels divided by the inches you intend to print.
Why does my image show 72 DPI, and is that too low to print?
A 72 value is usually just a default written by software and says nothing about quality. What matters is the pixel count: a 3000-pixel-wide image labelled 72 DPI prints at 10 inches wide at 300 DPI, because the density you get depends on the print size you choose.
How many pixels do I need for an 8 × 10 inch print at 300 DPI?
You need 2400 × 3000 pixels, because 8 inches × 300 = 2400 and 10 inches × 300 = 3000. At 150 DPI the same print needs only 1200 × 1500 pixels, though it will look softer up close.
Can I increase an image’s DPI by changing it in an editor?
Changing the number alone only relabels the file and changes its declared print size; the pixels stay the same. Resampling to more pixels adds interpolated data rather than real detail, so it cannot rescue an image that was too small to begin with.
Is 150 DPI good enough?
It can be acceptable for large prints that are viewed from a distance, but it is not a universal standard and text or fine detail will look softer. Ask your printer which minimum it accepts, and use 300 DPI when you are unsure.
Why can’t I check a WebP, HEIC or TIFF file?
This tool reads the headers of PNG, JPEG and GIF files only, which is what the file picker accepts. Convert other formats to PNG or JPEG first, or check the pixel dimensions in your editor and divide by the print size yourself.
Is my image uploaded to a server?
No. The file is read in memory by your browser and the header is parsed locally, so nothing is sent or stored. Closing the tab discards it.
Sources and retrieval dates
- W3C Portable Network Graphics (PNG) Specification, Third Edition: pHYs chunk — defines pixels per unit and the unit specifier (1 = metre) used for PNG density (retrieved 2026-10).
- Amazon KDP paperback submission guidelines — states a minimum image resolution of 300 DPI (retrieved 2026-10).
- Amazon KDP paperback cover requirements — states cover images should be placed at a minimum of 300 DPI (retrieved 2026-10).
JPEG density handling follows the JFIF convention (units 1 = dots per inch, 2 = dots per centimetre) as implemented in this tool’s code; that part is not independently cited here.