Canada · Engineering · Registers by province

Engineer lookup by province.

Engineering is regulated by twelve bodies across Canada, one per province and one shared by the Northwest Territories and Nunavut. This page names each from Engineers Canada’s list, says what its directory covers, and routes you to the guide.

Short answer: To verify a professional engineer in Canada, open the register of the regulator for the province or territory where the person is licensed. Engineers Canada lists twelve regulators: one per province, plus Engineers Yukon and NAPEG, which covers the Northwest Territories and Nunavut together. Most directories cover individual members, engineers-in-training and companies holding a permit or certificate of authorization, and several let you check the number on a stamp. Pick the province below to open the guide.

Source: Engineers Canada, Engineering regulators; each regulator via the guides linkedRetrieved November 11, 2026Last updated November 11, 2026Unofficial guide

Advertisement

Pick a province or territory

Choose the province or territory where the engineer is licensed; the number on a stamp belongs to one regulator.

Province by province

British Columbia

Engineers and Geoscientists British Columbia (EGBC). The guide covers the Registrant Directory and notes that EGBC’s site can block automated tools, so open it in a normal browser.

Alberta

Association of Professional Engineers and Geoscientists of Alberta (APEGA). Member directory for engineers, geoscientists and permit holders, with what “practicing” means and a stamp-fraud warning.

Saskatchewan

Association of Professional Engineers and Geoscientists of Saskatchewan (APEGS). The Register of engineers, geoscientists and Certificate of Authorization holders; the guide explains why a name mismatch can hide a real registrant.

Manitoba

Engineers Geoscientists Manitoba. Member and Company Directory covering engineers, geoscientists, interns and companies, with research-only terms.

Ontario

Professional Engineers Ontario (PEO). The Directory verifies a P.Eng., EIT or Certificate of Authorization holder; the guide explains the licence number.

Quebec

Ordre des ingénieurs du Québec (OIQ). The bottin des membres, in French, with what an OIQ seal must show; the guide explains it in English.

New Brunswick

Engineers and Geoscientists New Brunswick, listed by Engineers Canada at apegnb.com. The Public Registry covers engineers, geoscientists and firms, and shows how EITs and retired registrants appear.

Nova Scotia

Engineers Nova Scotia. Member and Company Directory, including how to verify an engineer from the number on their stamp.

Prince Edward Island

Engineers PEI. A Membership Directory searched by first name or last name with a three-letter minimum; an “Employer Company” shown there does not hold a Certificate of Authorization.

Newfoundland and Labrador

Professional Engineers and Geoscientists of Newfoundland and Labrador (PEGNL). Public Register of engineers, geoscientists and companies, with designations and practice statuses.

Yukon

Engineers Yukon, as listed by Engineers Canada. No guide yet; the button opens the regulator’s site.

Northwest Territories and Nunavut

Northwest Territories and Nunavut Association of Professional Engineers and Geoscientists (NAPEG), one regulator for both territories, as listed by Engineers Canada.

Showing all entries. Pick a province or territory to see only its regulator and the search it runs.

Advertisement

Twelve regulators on one list

Engineers Canada is the national organisation of the regulators, not a regulator, and its “Engineering regulators” page lists twelve bodies: Engineers and Geoscientists British Columbia, the Association of Professional Engineers and Geoscientists of Alberta, the Association of Professional Engineers and Geoscientists of Saskatchewan, Engineers Geoscientists Manitoba, Professional Engineers Ontario, the Ordre des ingénieurs du Québec, Engineers and Geoscientists New Brunswick, Engineers Nova Scotia, Engineers PEI, Professional Engineers and Geoscientists of Newfoundland and Labrador, Engineers Yukon, and the Northwest Territories and Nunavut Association of Professional Engineers and Geoscientists. Twelve bodies cover thirteen jurisdictions because NAPEG serves both the Northwest Territories and Nunavut. Most also regulate geoscientists, which is why several directories carry both professions.

RegulatorWhat the directory covers (from the guide)Guide
EGBCRegistrant Directory; open in a normal browserBritish Columbia
APEGAMembers, geoscientists, permit holders; stamp-fraud warningAlberta
APEGSRegister incl. Certificate of Authorization holdersSaskatchewan
Engineers Geoscientists ManitobaMembers, interns and companies; research-only termsManitoba
PEOP.Eng., EIT and Certificate of Authorization holdersOntario
OIQBottin des membres (French); seal requirementsQuebec
Engineers and Geoscientists NBPublic Registry; EITs and retired registrantsNew Brunswick
Engineers Nova ScotiaMember and Company Directory; verify from the stamp numberNova Scotia
Engineers PEIMembership Directory; three-letter minimumPrince Edward Island
PEGNLPublic Register; designations and practice statusesNewfoundland and Labrador

Person, company or stamp

The directories answer three different questions. Is this person licensed: a P.Eng., or an engineer-in-training (EIT), which is a stage before licensure and appears in several directories as its own designation. Is this company allowed to offer engineering services: most provinces require a permit or Certificate of Authorization, listed separately, and Engineers PEI warns that an employer company shown beside a member’s name does not hold one. And is this stamp genuine: Engineers Nova Scotia and APEGA, among others, let you check the number on a seal, and the OIQ guide says what a Quebec seal must show. The P.Eng. versus EIT guide linked above explains what each designation proves before you open a directory.

How to use this page

Pick the province in the panel above and open the guide, which describes the search fields, the designations and statuses, and any terms of use, then open the official directory from the guide. For Yukon and NAPEG, where there is no guide, the button opens the regulator’s own site as Engineers Canada lists it. Quebec’s bottin is in French and the OIQ guide explains it in English. If a name is missing, the APEGS guide’s point applies everywhere: a mismatch in how a name is recorded can hide a real registrant, so try a shorter form before concluding anything, and contact the regulator.

Worked example

A contractor in Fredericton receives stamped drawings from a firm in Halifax. The stamp carries a Nova Scotia number, so the contractor picks Nova Scotia, opens the Engineers Nova Scotia guide and verifies the engineer from the stamp number in the Member and Company Directory, then checks the firm there too. The project also needs a New Brunswick engineer of record, so the contractor switches to New Brunswick and searches the Public Registry for that person, where the entry shows a full registration rather than an EIT designation.

Common mix-ups

  • Engineers Canada keeps a national directory of licensed engineers. Engineers Canada lists the twelve regulators; the directories belong to them. A search for “engineer lookup Canada” ends at one of those twelve.
  • Thirteen jurisdictions means thirteen engineering regulators. There are twelve: NAPEG regulates both the Northwest Territories and Nunavut.
  • A company listed beside an engineer’s name holds a permit to practise. Engineers PEI says an employer company shown in its directory does not hold a Certificate of Authorization. Company permits are listed separately where they exist.
  • An EIT in a directory is a licensed professional engineer. EIT is a pre-licensure designation that several directories show separately; only the P.Eng. (or ing. in Quebec) is the licence.
  • A stamp number can be checked against any province’s directory. The number belongs to the regulator that issued it. Verify a Nova Scotia stamp with Engineers Nova Scotia, an Alberta stamp with APEGA, and so on.

Method

This page does not search any register and keeps no copy of any listing. The panel shows or hides the province entries you pick; nothing is sent anywhere. The twelve regulators and their addresses were read from Engineers Canada’s page on November 11, 2026; the descriptions of each directory come from the guides linked, each written from that regulator’s own pages. Licence status belongs to the regulators and changes; only their directories are current.

What this does not cover

Figures read from the sources below on November 11, 2026. Last updated November 11, 2026.

Sources

Advertisement

Frequently asked questions

How do I verify a professional engineer in Canada?

Open the directory of the regulator for the province or territory where the engineer is licensed, search the name or the stamp number, and read the designation and status. Pick the province above to open the guide.

How many engineering regulators are there in Canada?

Engineers Canada lists twelve: one in each province, Engineers Yukon, and NAPEG for the Northwest Territories and Nunavut together.

Does Engineers Canada keep a register of engineers?

No. It is the national organisation of the regulators; its page lists them, and each keeps its own directory.

Can I check the number on an engineer’s stamp?

In several provinces, yes; the Engineers Nova Scotia and APEGA guides cover it, and the OIQ guide says what a Quebec seal must show. The number belongs to the regulator that issued it.

What is the difference between a P.Eng. and an EIT?

The P.Eng. is the licence; the EIT is an engineer-in-training before licensure. Several directories show the EIT designation separately, and the P.Eng. versus EIT guide explains what each proves.

Is the Quebec directory in French?

Yes. The Ordre des ingénieurs du Québec bottin des membres is in French; the OIQ guide explains it in English.

Does this page verify an engineer?

No. It names the regulator for each province and links the guide and the official directory. The directory is the only record.

Guide only — not a verification tool

This page describes the official registers and links to them. It does not check anyone’s registration, does not copy or proxy any register, and nothing you pick here is transmitted anywhere. Registers change; use the official source linked above and contact the regulator to confirm anything that matters.