Audio · MP3 to WAV
MP3 to WAV converter, 16 or 24-bit.
Decode MP3s into uncompressed WAV for an editor, a sampler or a CD burner. Pick the bit depth and sample rate, convert up to ten files at once, and nothing leaves your device.
What an MP3 to WAV conversion really does
An MP3 stores a compressed approximation of a recording. Converting it to WAV decodes that approximation into plain PCM samples, the format that editors, samplers, hardware and CD-burning software understand without any further decoding. The WAV will sound the same as the MP3 plays, because it is the MP3, unpacked. It will not sound better. Detail the MP3 encoder threw away is gone for good, and no bit depth setting brings it back.
That is why this page says so plainly: choosing 24-bit or 32-bit float does not add quality. It gives the decoded audio more headroom for what you do next (editing, gain changes, effects) so extra rounding errors do not pile up. If you only want to play the file, you do not need a WAV at all.
Choosing 16-bit, 24-bit or 32-bit float
16-bit is the CD standard (44.1 kHz, stereo) and is the right pick for burning a disc, for most hardware and for any tool that does not say otherwise. 24-bit is the common studio working depth; use it if your project is 24-bit so the editor does not have to convert. 32-bit float keeps the decoder’s native precision and avoids rounding when you will process the file further. No dither is applied, so a 16-bit result is the decoded audio simply rounded to 16 bits.
File size is fixed by the settings, not by the music: sample rate × channels × bytes per sample × seconds. A three-minute stereo track at 44.1 kHz is 31.75 MB in 16-bit, 47.6 MB in 24-bit and 63.5 MB in 32-bit float. Compare that with roughly 4.3 MB for the same track as a 192 kbps MP3. The result card shows the actual size before you download.
Sample rate and channels
Leave the sample rate on “Keep” unless something downstream demands a particular value; the tool then writes the rate the MP3 already had, usually 44.1 or 48 kHz. Choosing 96 kHz only repeats the same content at a higher rate (it is resampled, not restored), and a lower rate such as 22.05 kHz removes high frequencies. Channels can be kept, forced to mono (the two sides are mixed together) or to stereo (a mono file is duplicated to both sides).
Worked example
You need a 4-minute backing track in a sampler that accepts only 16-bit, 44.1 kHz WAV. The MP3 is 44.1 kHz stereo. Leave Keep rate and Keep channels, choose 16-bit and convert. Expect about 42.3 MB (176,400 bytes per second × 240 s), and a duration within a few hundredths of a second of the MP3, because MP3 frames and encoder padding can shift the exact length slightly.
Limits and common mistakes
- Ten files per run, 300 MB each. WAV is large, so a long MP3 can expand beyond the memory the browser engine has; very long files may fail even under the limit.
- A WAV file cannot hold more than about 4 GB; the file limit keeps results well under that.
- MP3 tags (artist, title) are not written into the WAV. Plain WAV has no standard place that every program reads.
- Do not re-encode a WAV back to MP3 and expect the original. Each round trip through a lossy format adds artefacts.
- If the engine cannot start on your device, the page falls back to the browser’s own MP3 decoder and still writes a WAV, and it tells you it did.
Privacy: what the code does
The converter runs in a sandboxed frame that has no network access and loads no tracking or advertising scripts. Your MP3 is read in the browser, decoded by FFmpeg compiled to WebAssembly (or by the browser’s own decoder in the fallback) and returned as a download from your own device. No copy is sent anywhere and nothing is kept when you close the tab.
Common mix-ups
-
Often assumedAn MP3 is stored inside a container like any other media file.
What the source saysMDN notes that an MP3 file is essentially a stream of MPEG-1 Audio Layer III frames, often with ID3 metadata, rather than a conventional container. WAV is a different format that normally holds linear PCM. [1]
-
Often assumedMP3 was designed as a file format, so its tags and timing are always reliable.
What the source saysRFC 3003 notes that MPEG audio was not designed as a file format but for transmitting audio streams, and that tags such as ID3 are added to the stream. That is why metadata handling differs between tools when you decode to WAV. [2]
Checked against these sources on .
Frequently asked questions
Does converting MP3 to WAV improve the sound quality?
No. The WAV contains exactly what the MP3 decodes to. It is larger and uncompressed, but the information the MP3 encoder removed is not restored.
Which bit depth should I choose?
16-bit for CDs and most devices, 24-bit if your editing project is 24-bit, and 32-bit float if you will process the audio further and want to avoid rounding.
Why is the WAV so much bigger than the MP3?
WAV stores every sample uncompressed. One minute of 44.1 kHz stereo 16-bit audio is 10.58 MB, while the same minute at 128 kbps MP3 is about 0.96 MB.
Can I burn the WAV to an audio CD?
Yes, if you keep 44.1 kHz, 16-bit, stereo. Most burning programs resample other formats themselves, but matching the CD format avoids that step.
Is dither applied when I choose 16-bit?
No. The decoded audio is rounded to 16 bits without dither. For ordinary listening this is not audible; if you plan heavy processing, choose 24-bit or 32-bit float instead.
Are my files uploaded?
No. The page has no upload step. Decoding happens in your browser and the result is a download from your own device.
Why is the WAV a little longer or shorter than the MP3?
MP3 audio is stored in fixed-size frames and encoders add padding at the start and end, so decoded length can differ by a few hundredths of a second.
What if the audio engine does not load?
The page then uses your browser's built-in decoder to write the WAV and says so on the result card. That fallback supports the same bit depths and sample rates.
Sources
Standards and documentation behind the claims on this page.
- WAVE Audio File Format (Library of Congress) (retrieved 2026-10-20): WAVE as a RIFF container holding uncompressed PCM audio.
- MP3 (Wikipedia) (retrieved 2026-10-20): MP3 as lossy compression and its frame structure.
- Compact Disc Digital Audio (Wikipedia) (retrieved 2026-10-20): CD audio is 44.1 kHz, 16-bit, two-channel PCM.
- FFmpeg codecs documentation (retrieved 2026-10-20): PCM encoders (16-bit, 24-bit, 32-bit float).
- MDN: BaseAudioContext.decodeAudioData() (retrieved 2026-10-20): The browser decoder used by the fallback path.
What this tool does not do
It does not restore anything the MP3 encoder discarded, apply dither, or write MP3 tags into the WAV. Lossy formats (MP3, AAC, Ogg) discard information, so keep your originals.