Audio · M4A to WAV
M4A to WAV converter for editing and archiving.
Unpack .m4a recordings into uncompressed WAV so an audio editor, a transcription tool or a DAW can open them. Works on AAC and Apple Lossless, batches ten files and keeps everything on your device.
When M4A to WAV is the right conversion
M4A is a container, not a codec. Inside an .m4a file the audio is usually AAC, a lossy format, and sometimes Apple Lossless (ALAC), which is exactly reversible. Many editors, older DAWs, speech-to-text tools and academic analysis programs want plain WAV. Converting M4A to WAV is the clean way to hand the audio over: it is decoded once and nothing more is lost afterwards, however many times you edit and save.
Pick WAV rather than MP3 when the next step is editing. An MP3 would compress the audio a second time; a WAV does not. Pick MP3 when you only need a smaller copy to send, and use the M4A to MP3 converter for that.
AAC versus Apple Lossless inside the file
The tool reports the codec it found beside each result. If it says aac, the WAV is a decoded copy of an already-compressed recording: it contains what AAC kept and nothing more, and it is bigger than the M4A only because it is uncompressed. If it says alac, the M4A was lossless and the WAV holds exactly the same samples, so you lose nothing at all by converting.
A practical consequence: an AAC voice memo at 64 kbps becomes a WAV of 1,411 kbps (if it is 44.1 kHz stereo 16-bit) or 768 kbps for 48 kHz mono 16-bit. The WAV is about 12 times larger and carries no extra information. That is expected, not a fault.
Settings that matter
Bit depth. 16-bit suits nearly every purpose. Choose 24-bit if your editing project works in 24-bit, or 32-bit float to avoid rounding between processing steps. A 16-bit result is rounded without dither.
Sample rate. Leave it on Keep. recordings from phones are commonly 44.1 or 48 kHz; changing the rate resamples the audio and cannot add detail. Channels. Keep gives you the original layout. A recording captured in mono stays mono, which halves the WAV size compared with a stereo copy of the same sound.
Worked example
You have a 45-minute interview recorded as a 48 kHz mono AAC memo and your transcription program only takes WAV. Keep the rate and channels, choose 16-bit. The WAV size is 48,000 samples × 2 bytes × 2,700 seconds, which is 259.2 MB, under the 300 MB limit. A 90-minute memo would be about 518 MB, so cut it in two in your recorder first.
What to do with the WAV next
Most free editors, including Audacity, open WAV without any extra codec, and transcription and subtitling tools tend to prefer it because there is no compressed stream to decode first. If you only need to trim the start and end of several recordings, the batch audio trimmer can do that while writing MP3. If you are editing, work on the WAV and export a final MP3 at the end rather than converting back and forth, so each step starts from the same decoded audio.
Keep the original M4A until you are happy with the result. It is the smallest copy, it holds the tags and chapters the WAV does not, and for an Apple Lossless file it is a perfect compact master.
Limits and common mistakes
- Ten files per run, 300 MB each. WAV is much larger than M4A, so long recordings hit memory limits sooner than you expect from the M4A size alone.
- Length can differ from the original by a few hundredths of a second, because AAC stores audio in frames with encoder padding.
- Protected M4P files bought from old music stores cannot be decoded.
- Chapters, cover art and tags are not written into the WAV.
- Do not convert WAV back to M4A and call it lossless. Only an Apple Lossless M4A round-trips exactly.
Privacy: what the code does
Your recordings are decoded inside the page. The tool frame has no network access, loads no advertising or analytics, and uses FFmpeg compiled to WebAssembly (or the browser’s own decoder if the engine cannot start). The WAV you download is created on your device and nothing is stored once you close the tab. That matters for voice memos, which often hold interviews, meetings or personal notes.
Common mix-ups
-
Often assumedSaving an AAC .m4a as WAV brings back the detail AAC discarded.
What the source saysMDN's guide says lossy compression always loses some fidelity. Decoding to WAV writes the decoded samples uncompressed; it does not restore what the encoder removed. The WAV is bigger, not better. [1]
-
Often assumedA WAV file is compressed audio like MP3.
What the source saysMDN says nearly all WAV files use linear PCM, which is uncompressed, and that support for other codecs inside WAV is sparse. That is why a WAV made from a small .m4a is much larger. [2]
Checked against these sources on .
Frequently asked questions
Can this convert iPhone voice memos to WAV?
Yes. Voice Memos are saved as .m4a, which the page accepts. The result is uncompressed WAV you can open in any editor or transcription tool.
Will the WAV be better quality than the M4A?
No. If the M4A is AAC, the WAV holds the same decoded audio. If it is Apple Lossless, the WAV holds identical samples. Neither gains quality.
Why is the WAV so large?
WAV is uncompressed. A 64 kbps AAC memo becomes 768 kbps as 48 kHz mono 16-bit WAV, about 12 times larger.
What is the difference between M4A and AAC?
AAC is the compression method. M4A is the file container that usually holds it. A raw .aac file is a bare AAC stream without that container.
Does the converter handle Apple Lossless?
Yes. The codec is shown beside each result, and an Apple Lossless M4A converts to WAV without any loss of samples.
Which bit depth should I pick?
16-bit for general use, 24-bit if your project is 24-bit, 32-bit float if you will process the audio heavily and want to avoid rounding.
Can I convert many files at once?
Up to 10 per run, each up to 300 MB. They run one after another and each downloads separately.
Is anything uploaded?
No. The tool runs in a sandboxed frame with no network access; the conversion is done by code in your own browser.
Sources
Standards and documentation behind the claims on this page.
- Advanced Audio Coding (Wikipedia) (retrieved 2026-10-20): AAC and the .m4a, .m4b, .mp4 and .aac extensions.
- Apple Lossless Audio Codec (Wikipedia) (retrieved 2026-10-20): ALAC is lossless and stored in an MP4/M4A container.
- WAVE Audio File Format (Library of Congress) (retrieved 2026-10-20): WAVE as an uncompressed PCM container.
- FFmpeg formats documentation (retrieved 2026-10-20): MP4/MOV demuxing and the WAV muxer.
- FFmpeg codecs documentation (retrieved 2026-10-20): PCM and AAC/ALAC codec reference.
What this tool does not do
It does not make AAC audio lossless, remove DRM from protected purchases, or carry chapters, tags and cover art into the WAV. Lossy formats (MP3, AAC, Ogg) discard information, so keep your originals.