Audio · WAV to FLAC
WAV to FLAC converter with a lossless check.
Shrink WAV files losslessly and prove it. Each FLAC is decoded again and compared with the WAV, so you can delete the original with evidence. Up to ten files per run, all done on your own device.
What lossless means, and how this page shows it
FLAC compresses audio the way a zip file compresses a document: the original comes back bit for bit when you decode it. That is different from MP3 or AAC, which discard information. Because of that, converting WAV to FLAC should never change how the music sounds; it only changes how much disk space it uses.
“Should” is not proof, so the page can check. With “Verify” ticked (the default), each finished FLAC is decoded again and a hash of its samples is compared with a hash of the WAV’s samples, both read as 32-bit PCM by the same path. Identical hashes mean identical samples. The card then says Verified. If they ever differ, it says the check failed and tells you not to delete the original.
Compression level and file size
FFmpeg’s FLAC encoder takes a level from 0 to 12 (the default is 5). Higher levels search harder for a smaller result and take longer; the audio is identical at every level. Levels 0 to 2 are fast and a little bigger, 5 is a sensible middle, and 8 to 12 may squeeze out a little more at a noticeable time cost. Every level produces a file that any FLAC player reads.
How much you save depends on the music. Dense, loud, noisy recordings compress least; quiet, sparse or mono material compresses most. The result card shows the real before and after sizes and the percentage, so you do not have to guess.
Bit depth, floating-point WAV and what is not exact
With “Keep”, a 16-bit WAV stays 16-bit FLAC and anything deeper becomes 24-bit FLAC. You can also force 16 or 24-bit. Forcing 16-bit on a 24-bit source rounds the samples, so the page does not run the identity check for that choice; it says plainly that the result is not bit-identical.
One more case is not exactly lossless: a 32-bit floating-point WAV. FLAC stores integers, so floating-point samples are converted to 24-bit integers. The page detects this, converts anyway, and reports “Not bit-identical” instead of claiming a match. For true float archiving, keep the WAV. A 32-bit integer WAV is likewise written as 24-bit FLAC, which reduces its precision to 24 bits and is reported the same way.
Worked example
You exported a 5-minute 24-bit, 48 kHz stereo master from a DAW. As WAV that is 86.4 MB (48,000 × 6 bytes × 300 s). Convert at level 8 with Verify on. Expect a FLAC noticeably smaller than that, with the exact figure depending on the mix. The card shows your number and, once it reads Verified, you can archive the FLAC and delete the WAV.
Why FLAC for archiving
FLAC is an open format with a published specification (RFC 9639) and decoders on every major platform, which is the reason archives and libraries use it for audio they want to keep. The Library of Congress keeps a format description for it among its digital preservation resources. Compared with WAV it adds checksums, so a damaged file is detectable, and it holds tags in a standard place. Compared with MP3 it keeps every sample. What it does not do is shrink audio as far as a lossy format: expect a moderate saving against WAV, not the order-of-magnitude saving a lossy format gives.
Tags and other metadata
Text tags stored in the WAV (the INFO list, which holds fields like title and artist) are copied to the FLAC when “Keep tags” is ticked. Many WAV files carry none. Other chunk data, such as broadcast-wave (BWF) time references or cue markers, is not preserved as such, so if you rely on it keep the WAV.
Limits and privacy
- Ten files per run, 300 MB each. Long 24-bit stereo files hit that quickly.
- Verification adds time because both files are decoded again; untick it for speed once you trust your setup.
- The tool runs in a sandboxed frame without network access, advertising or analytics. Your WAV is read in the browser, encoded by FFmpeg compiled to WebAssembly and returned as a download from your own device. Nothing is uploaded or stored.
Common mix-ups
-
Often assumedFLAC shrinks a WAV by throwing some detail away.
What the source saysRFC 9639 defines FLAC as lossless: it reduces storage space without losing information, so the decoded samples match the WAV you started with. The size drop comes from removing redundancy only. [1]
-
Often assumedWAV and FLAC are both just wrappers around the same data, so a WAV is as small as a FLAC.
What the source saysMDN says nearly all WAV files use linear PCM, which is uncompressed, so a WAV is larger than the equivalent FLAC. MDN's guide puts lossless compression at unlikely to exceed about 40 to 50 percent. [2]
Checked against these sources on .
Frequently asked questions
Is WAV to FLAC really lossless?
Yes for integer PCM WAV: decoding the FLAC reproduces the same samples. This page proves it per file by comparing hashes of the decoded audio.
What does the compression level change?
Only encoding effort and file size. Level 0 is fastest and largest, level 12 slowest and smallest, and the decoded audio is identical at every level.
Why does a floating-point WAV say not bit-identical?
FLAC stores integers. A 32-bit float WAV is rounded to 24-bit integers, so the samples change very slightly. Keep the WAV if you need exact floating-point data.
How much smaller will the FLAC be?
It depends on the audio. The result card shows the real percentage for each file; noisy, dense music saves less than quiet or sparse recordings.
Are my tags kept?
Text tags in the WAV INFO list are copied when Keep tags is ticked. Other chunk data such as cue markers is not preserved as such.
Should I delete the WAV after converting?
Only after the card says Verified, and ideally after you have played the FLAC. Floating-point WAV files are the exception: keep those.
Does FLAC work everywhere?
Most modern players, phones and software read it, though some older devices and some video editors do not. For those, use the WAV to MP3 converter.
Is anything uploaded?
No. The encoder and the check both run in your browser inside a frame with no network access.
Sources
Standards and documentation behind the claims on this page.
- RFC 9639: Free Lossless Audio Codec (FLAC) (retrieved 2026-10-20): FLAC is lossless and stores integer samples; metadata blocks.
- FLAC format specification (Xiph.Org) (retrieved 2026-10-20): FLAC stream layout.
- FFmpeg codecs documentation (retrieved 2026-10-20): FLAC encoder compression_level 0 to 12, default 5.
- FLAC (Library of Congress) (retrieved 2026-10-20): FLAC as an archival lossless format.
- WAVE Audio File Format (Library of Congress) (retrieved 2026-10-20): WAVE structure and PCM data.
What this tool does not do
It does not make a floating-point or 32-bit WAV bit-identical (FLAC stores integers up to 24 bits), preserve cue or broadcast-wave data, or reduce quality at any compression level. Lossy formats (MP3, AAC, Ogg) discard information, so keep your originals.