Audio
Video to MP3.
Pull the audio track out of up to 10 videos at once and save each as an MP3 at up to 320 kbps, right in your browser — nothing is uploaded to a server, free.
How to extract audio from a video
- Choose up to ten videos in MP4, WebM, MOV or MKV format, up to 2 GB and 3 hours each.
- Pick the MP3 bitrate from 96 to 320 kbps.
- Press Extract audio.
- Download each MP3.
Choosing a bitrate
128 kbps is fine for speech such as interviews, lectures and podcasts, and it keeps files small. For music you care about, use 192 kbps or more, and 320 kbps, the ceiling for MP3, when you want the best quality from this format. Higher bitrates make larger files without improving a poor source, so a low-quality video will not sound better at 320.
The tool removes the video track and encodes the audio to MP3 whatever container the video uses. Use it only on recordings you have the right to copy, such as your own videos, meetings you recorded or material that is licensed for reuse.
Extracted on your device
The extractor runs in your browser, inside an isolated frame on this page that has no network access. Your file is read and written back by your own device, so it is not uploaded to TNAADO or anyone else, and nothing is stored. The advertising on this page sits outside the frame and cannot see what you choose. A WebAssembly build of FFmpeg runs inside the frame with no network access, so your recordings are not uploaded.
- Long videos take time and memory; process them one at a time if the browser slows down.
- The first run loads the audio engine.
Extract the audio from a video file
The converter takes an audio track from a local video file and writes a separate MP3. That is useful for a recorded interview, a voice memo captured in a camera app, a lecture you have permission to reuse, or an editing proxy where only the dialogue matters. It does not fetch a video from a website or turn a streaming link into a download.
MP4, MOV, WebM and MKV are containers. Each can hold different audio codecs and more than one audio track. ffmpeg.wasm reads the selected file, chooses the default audio stream and encodes it as MP3. The source video remains unchanged on your device.
Worked example: extract a 12-minute interview
Choose a 12-minute MP4 and select 192 kbps. The audio payload will be about 17.3 MB before MP3 headers and tags: 192 kilobits per second multiplied by 720 seconds, divided by eight. A 96 kbps speech copy would be about half that size. The bitrate changes the new MP3; it does not improve the microphone, remove room noise or restore detail missing from the video's audio track. Check another duration with the audio file size calculator.
What stays private
The page uses ffmpeg.wasm inside the browser. Your chosen video is copied into a temporary in-browser file system, the MP3 is read back into memory, and the download is exposed through a local object URL. TNAADO does not receive the video or extracted audio. Closing or reloading the tab ends that working session.
Limits and checks before a batch
- The page allows up to ten files per run, with a cap of 2,000 MiB (about 2.10 GB) and three hours per file. Available device memory can impose a lower practical limit.
- Files with several language, commentary or surround tracks may not yield the track you expected because the current command uses FFmpeg's default stream selection.
- The MP3 contains audio rather than video or subtitles. Tag and chapter carryover depends on the source and encoder; check the resulting metadata.
- Encrypted or DRM-protected media is outside the tool's purpose. File access does not grant copyright permission.
Listen to one result before processing the remaining files. If the track needs a shorter opening or ending, continue in the audio trimmer. If you need the picture too, use the video trimmer instead.
Sources and review date
Browser-processing behaviour and the 2 GB WebAssembly note were checked against the ffmpeg.wasm overview and project FAQ. Stream selection and output behaviour follow the FFmpeg command documentation. Page and tool behaviour reviewed 17 November 2026.
Frequently asked questions
Does converting a video to MP3 upload the video?
No. The selected video is copied into ffmpeg.wasm's temporary browser file system and processed in the tab. TNAADO does not receive the video or extracted audio.
Does video to MP3 improve the sound quality?
No. The MP3 can only represent audio already present in the video. Choosing 320 kbps cannot restore frequencies or detail lost in the source track.
What MP3 bitrate should I use for speech?
For a spoken memo, lecture or interview, 96 or 128 kbps is usually the practical starting point. Use a short sample and listen before processing a large batch, because source quality matters more than the label alone.
Why can a large video fail in the browser?
The browser must hold the media and WebAssembly working data locally. This page caps each file at 2,000 MiB and three hours, but a device can run out of memory before those limits.
Will the MP3 include captions or every audio track?
No captions or video are included. The current extraction command maps the audio FFmpeg chooses by default, so a file with several language or commentary tracks may not produce the track you expected.
Can this tool extract audio from protected streaming video?
No. It works with a video file you can select from your device. It does not download videos from a URL, bypass digital rights management, or grant permission to reuse copyrighted audio.