Audio · FLAC to MP3
FLAC to MP3 converter that keeps your tags.
Make portable MP3 copies of your FLAC library. Title, artist and album tags come along, hi-res files are brought down to a rate MP3 supports, and your music stays on your own device throughout.
Why keep FLAC and still make MP3
FLAC is a lossless format: decode it and you get back exactly the samples that went in. That makes it the right master for a music library. It is also big, much larger than an MP3, and a lot of hardware (car head units, older phones, small players) either cannot play it or runs out of space. So the usual pattern is to keep the FLAC files as the archive and make MP3 copies to carry around. That is the job of this page.
Because the source is lossless, this conversion only loses data once, in the MP3 encoder. That is a better starting point than converting from another lossy file, and it is why a high-quality setting here can be very hard to tell from the original on ordinary equipment.
Tags: what carries over and what does not
FLAC stores tags as Vorbis comments (TITLE, ARTIST, ALBUM, TRACKNUMBER and so on). With “Keep tags” ticked, the engine maps these to ID3v2.3, the tag version nearly every player understands, and writes them into the MP3. The converter reports success per file, but it does not list the tags, so check one result in your player before converting a whole album.
Embedded cover art is not copied to the MP3. If your player needs artwork, add it afterwards with a tag editor or place a folder image beside the files. With the box unticked, the MP3 is written with no tags at all.
Quality settings for a music library
The default here is VBR V0, the highest LAME variable-bitrate quality, which suits an archive-grade portable copy. If you need a predictable size, use constant 320 kbps for the best quality MP3 allows, 256 kbps for a good balance, or 192 kbps for phones with limited space. A 4-minute track at 320 kbps is 9.6 MB, at 256 kbps 7.7 MB and at 192 kbps 5.8 MB.
MP3 cannot store sample rates above 48 kHz. A 96 kHz or 192 kHz FLAC is therefore converted to 48 kHz unless you choose another supported rate; 88.2 and 176.4 kHz files move to 48 kHz too, and the MP3 reports the rate it used. The extra bit depth of a 24-bit FLAC is also not kept, since MP3 does not store bit depth. There is no audible benefit to asking for more bitrate than 320 kbps because the format does not offer it.
Worked example
You have an album of eleven 24-bit, 96 kHz FLAC files and a car stereo that reads MP3 only. Select ten at a time (the batch limit), keep the tags box ticked, choose VBR V0 and leave the sample rate on Keep. The tool maps 96 kHz to 48 kHz, writes ID3v2.3 tags and returns ten MP3s. Convert the eleventh in a second run. If a file is over 300 MB (a very long hi-res track), it is skipped with a message.
Limits and common mistakes
- Ten files per run and 300 MB per file. Hi-res FLAC can pass 300 MB for a long track.
- MP3 to FLAC does not restore anything. The reverse direction produces a lossless container around lossy audio.
- Files are named after the originals with .mp3; if two files in a batch would share a name, the second becomes “name (2).mp3”.
- Gapless albums: the encoder adds a little padding to each file, so tiny gaps can appear in players that do not support gapless playback.
- Multichannel FLAC (5.1) is mixed down to stereo by the encoder.
Privacy: what the code does
Your music is decoded and re-encoded inside the page by FFmpeg compiled to WebAssembly, with the LAME MP3 encoder. The tool frame has no network access and loads no advertising or analytics scripts. Files are read from your disk, processed in memory and returned as downloads; nothing is uploaded and nothing is stored once you leave.
Common mix-ups
-
Often assumedA FLAC file is already compressed, so an MP3 made from it is no different in quality.
What the source saysRFC 9639 defines FLAC as a lossless format that reduces storage space without losing information. MP3 is lossy, so the MP3 you make cannot be turned back into the FLAC samples; keep the FLAC. [1]
-
Often assumedA bigger MP3 bitrate always gives a smaller loss from FLAC.
What the source saysMDN's guide says higher bit rates can give higher quality but also larger files; it is a trade, not a restoration. MDN also notes lossless codecs rarely get beyond roughly 40 to 50 percent compression, so the FLAC is large for a reason. [2]
Checked against these sources on .
Frequently asked questions
Does the converter keep my FLAC tags?
Yes, when the Keep tags box is ticked. Vorbis comments are written as ID3v2.3 tags. Embedded cover art is not copied.
What is the best setting for FLAC to MP3?
VBR V0 or constant 320 kbps for the highest quality. 256 kbps CBR or VBR V2 saves space with a small quality cost, and 192 kbps is a compact choice for phones.
What happens to 24-bit and 96 kHz FLAC?
They are decoded in full and written as MP3 at a supported sample rate, 48 kHz for 96 kHz sources. MP3 stores neither 24-bit depth nor rates above 48 kHz.
Will I hear a difference from the FLAC?
Many listeners find 320 kbps or V0 hard to tell apart from the original on ordinary equipment, but that varies by person and system. It is still lossy, so keep the FLAC as your master.
Is FLAC to MP3 a lossy conversion?
Yes. FLAC is lossless, but MP3 is not, so the conversion discards some information once. It does not stack losses the way converting from another lossy format does.
Can I convert a whole album?
Up to 10 files per run, each up to 300 MB. For a larger album, run it in two batches.
Are my files uploaded anywhere?
No. They are processed in your browser by code running in a sandboxed frame without network access.
Why is the MP3 slightly longer?
MP3 uses fixed-size frames and encoders pad the end, so duration can differ by a few hundredths of a second.
Sources
Standards and documentation behind the claims on this page.
- RFC 9639: Free Lossless Audio Codec (FLAC) (retrieved 2026-10-20): FLAC is lossless and stores metadata blocks including Vorbis comments.
- FLAC format specification (Xiph.Org) (retrieved 2026-10-20): FLAC stream and metadata layout.
- ID3v2.3.0 informal standard (retrieved 2026-10-20): The tag version written to the MP3.
- LAME: variable bit rate (retrieved 2026-10-20): VBR quality scale -V 0 (highest) to -V 9.
- MP3 (Wikipedia) (retrieved 2026-10-20): Maximum sample rate (48 kHz) and bitrate (320 kbps) for MP3.
- FFmpeg codecs documentation (retrieved 2026-10-20): libmp3lame encoder options.
What this tool does not do
It does not copy embedded cover art, keep 24-bit depth or sample rates above 48 kHz, or make the MP3 lossless. Lossy formats (MP3, AAC, Ogg) discard information, so keep your originals.