Audio

Batch audio trim & convert.

Trim the start and end off up to 10 audio files and convert them all to MP3 at the bitrate you choose, in one pass. Runs entirely in your browser — nothing is uploaded, free.

How to trim and convert audio files

  1. Choose up to ten audio files in MP3, WAV, OGG, M4A, FLAC or AAC format.
  2. Set the trim start in seconds, and the trim end in seconds from the start; zero keeps the audio to the end.
  3. Pick the MP3 bitrate from 96 to 320 kbps.
  4. Press Trim & convert and download each file.

One setting for the whole batch

The start and end you set are applied to every file, which is useful for cutting the same intro or outro from a set of recordings, or for converting a folder of WAV or FLAC files to MP3 in one pass. For speech, 128 kbps is plenty. For music, use 192 kbps or higher, and 320 kbps for the best quality MP3 can deliver.

Converting from a compressed format to MP3 loses a little quality, so keep the originals for archiving. If you need different trims for different files, run the tool separately for each.

Processed on your device

The converter runs in your browser, inside an isolated frame on this page that has no network access. Your file is read and written back by your own device, so it is not uploaded to TNAADO or anyone else, and nothing is stored. The advertising on this page sits outside the frame and cannot see what you choose. FFmpeg compiled to WebAssembly runs inside the frame with no network access, so your audio is not uploaded.

How it works

Limits

Batches of up to 10 files per run, any trim range, and every bitrate up to 320 kbps.

Advertisement
Advertisement