Printable paper · Letter, A4, Legal
Printable graph paper PDF generator.
Choose the paper, the square size and how often a heavier line falls. The sheet is drawn at true size in your browser, so a 1/4 in square prints 1/4 in wide.
Short answer: pick Letter, A4 or Legal, set the square size (1/4 in, 5 mm and 10 mm are presets, anything from 1 mm to 100 mm is allowed), press Download PDF and print at Actual size. Only whole squares are drawn, centred in the printable area, so no half-squares are cut off at the edge.
How the sheet is worked out
Everything starts from the real paper size. Letter is 8.5 x 11 in, Legal is 8.5 x 14 in, and A4 is 210 x 297 mm as defined in ISO 216. A PDF measures in points, 72 to the inch, and an inch is exactly 25.4 mm, so the page is 612 x 792 pt for Letter and about 595.28 x 841.89 pt for A4. The printable area is the page minus the margin on each side, plus any punch-hole margin on the left. The generator divides that area by the square size, keeps only whole squares, and centres the grid so the leftover space is shared between the two sides. Nothing is rounded to a pixel, so every line falls at an exact multiple of the square size.
On Letter with 0.5 in margins and 1/4 in squares the printable area is 7.5 x 10 in, which holds exactly 30 x 40 squares. On A4 with 5 mm squares the same margins leave 184.6 x 271.6 mm, which holds 36 x 54 squares (180 x 270 mm), and the leftover 4.6 mm and 1.6 mm are split between the edges. On Legal in portrait with 1/4 in squares you get 30 x 52 squares. The line under the preview tells you the count for your own settings.
Choosing a square size
Wikipedia's article on graph paper names three common loose-leaf styles: 10 squares per centimetre (millimetre paper), 5 squares per inch (engineering paper) and 4 squares per inch (quad paper). All three are presets here: 1 mm, 1/5 in and 1/4 in. For notebook-style work many people simply want 5 mm or 10 mm squares on A4, or 1/4 in or 1/2 in on Letter, and those are in the list too. Anything else is a custom value in millimetres or inches, from 1 mm up to 100 mm. Very small squares ask a lot of a printer: below about 2 mm the lines start to merge on many office machines, so print one test page before a run.
Heavier lines, weight and colour
The heavier-line option draws every fifth (or fourth, eighth, tenth) line darker and 1.8 times thicker, counted from the first line of the grid, so a block of five squares is easy to read at a glance. Turn it off for a plain grid. The default colour is grayscale because a gray grid prints in black toner on a laser printer and does not use colour ink on an inkjet. Light gray is also easier to write over than black. Line weights run from a 0.25 pt hairline to a 1 pt bold line; if a draft-quality print makes the lines fade, step up one weight rather than switching to black.
Margins and punch holes
Many printers cannot print right to the edge of the sheet, which is why the default margin is 0.5 in; going below 0.25 in risks clipped lines on some machines. The punch-hole margin is added to the left edge only, on top of the normal margin, so a binder punch does not cut into the squares. It is a plain number because punches differ, so measure yours. With a 0.75 in punch margin on Letter the grid becomes 27 x 40 squares, 6.75 x 10 in, and its left edge sits 1.25 in from the paper edge.
Printing at true size
The sizes above only hold if the print dialog leaves the PDF alone. Choose Actual size or 100 percent, not Fit to page or Shrink oversized pages, and make sure the paper in the dialog matches the PDF: printing an A4 file on Letter paper will scale it or clip it. To check, measure across ten squares with a ruler. With 1/4 in squares ten squares should measure 2.5 in; with 5 mm squares, 50 mm.
Worked example
A student wants quad paper for a three-ring binder. They choose Letter, portrait, 1/4 in squares, heavier line every 5, grayscale, 0.5 in margin and a 0.75 in punch margin, and set the page count to 10. The summary reads 27 x 40 squares of 6.35 mm. They download one PDF, print it at Actual size, measure ten squares as 2.5 in, and have ten identical sheets without a signup or a watermark.
Common mistakes
- Printing with Fit to page. The grid is then a few percent smaller than you asked for and the squares are no longer 1/4 in.
- Choosing A4 for a Letter printer, or the reverse. The sheet size in the file and the sheet in the tray should match.
- Setting a margin smaller than your printer can reach and wondering why the outer lines are missing.
- Picking squares so small that the lines blur together. Print one page first.
- Expecting numbered axes. This makes a blank grid, not a coordinate plane.
Your settings stay in your browser
Nothing you set on this page is sent anywhere. The grid is worked out and drawn by JavaScript inside the sandboxed frame; when you press Download PDF, the frame loads the jsPDF library (MIT licence, version 4.2.1) from this site, builds the file in memory and hands it to your browser to save. The frame's content security policy allows this site's own scripts and styles and no outgoing connections, and it keeps nothing between visits. The ads and analytics around the frame sit in a separate document that cannot read it.
What this page does not do
- It does not make engineering drawing sheets with borders and title blocks, such as the ANSI/ASME Y14.1 formats; it makes blank grids.
- It does not draw logarithmic, polar or Cartesian graph paper with numbered axes.
- It does not guarantee your printer's output: print scaling, driver settings and paper stretch are outside the file.
- Avery and other label sheets are separate products with their own templates and are not covered here.
Common mix-ups
-
Often assumedA 1/4 inch grid and a 6 mm grid are close enough to treat as the same.
What the source saysNIST SP 811 lists inch to centimeter as exactly 2.54, so a 1/4 inch square is exactly 6.35 mm. A 6 mm or 5 mm grid is a different grid, not a rounding of the inch one. [1]
-
Often assumedA PDF point is the same as the printer's point, so sizes are exact in every workflow.
What the source saysThe PDF specification says its default user space unit of 1/72 inch is approximately the same as a point, but not exactly, because there is no universal definition of a point. This tool states sizes in inches and millimetres for that reason. [2]
- NIST SP 811 Appendix B: Conversion factors (inch)
- ISO 32000-1 (PDF 1.7) specification, Adobe-hosted copy
Checked against these sources on .
Frequently asked questions
What size is 1/4 inch graph paper?
Each square is 1/4 in (6.35 mm), which is 4 squares per inch. Wikipedia calls this quad paper. On Letter with 0.5 in margins this page fits 30 x 40 squares, a 7.5 x 10 in grid.
How do I print graph paper at exactly the right size?
Open the PDF, choose Actual size or 100 percent in the print dialog, turn off Fit to page and Shrink oversized pages, and match the paper size to the file. Check by measuring ten squares: 2.5 in for 1/4 in squares, 50 mm for 5 mm squares.
What is the difference between quad, engineering and millimetre paper?
Per Wikipedia, quad paper has 4 squares per inch, engineering paper has 5 per inch and millimetre paper has 10 per centimetre. They are the 1/4 in, 1/5 in and 1 mm presets in this generator.
Can I make graph paper with a custom square size?
Yes. Choose Custom and enter any size from 1 mm to 100 mm (about 0.04 to 3.9 in) in millimetres or inches. The squares are exactly that size, and only whole squares are drawn.
Does it work for A4 and Legal as well as Letter?
Yes. Letter is 8.5 x 11 in, Legal is 8.5 x 14 in and A4 is 210 x 297 mm, each in portrait or landscape. The PDF page is exactly that size, not a scaled Letter page.
Why does the grid not reach the edge of the page?
The generator keeps the margin you set and draws only whole squares, then centres the grid. The leftover space, always less than one square, is shared between the sides. Reduce the margin or change the square size to use more of the page.
Is the PDF uploaded, watermarked or limited?
No. It is built in your browser and saved to your device. There is no watermark, no signup and no page limit other than 50 identical sheets per file. The page shows ads, but they do not see your settings.
Why is grayscale the default colour?
Printing in gray uses black toner on a laser printer and no colour ink on an inkjet, and a light gray grid is easier to write over. Black, blue and green are available if you want them.
Sources
Retrieved
- Wikipedia: Graph paper (quad 4 per inch, engineering 5 per inch, millimetre 10 per cm)
- Wikipedia: ISO 216 (A4 is 210 x 297 mm; cites the ISO standard)
- Wikipedia: Paper size (North American Letter and Legal; ANSI/ASME Y14.1 drawing sizes)
- Wikipedia: Inch (exactly 25.4 mm since the 1959 agreement)
- jsPDF project page (MIT licence; the PDF library this site vendors)
Each link was opened on the retrieval date and the facts attributed to it were read from it. Sizes, counts and geometry on this page are computed by the code and checked by automated tests.
General information, check the print preview
Printers scale, crop and stretch paper in ways a PDF cannot control, so measure a test sheet before you print a batch. TNAADO is not affiliated with Avery, ISO, ANSI, ASME or any standards body named here.