Printable paper · Letter, A4, Legal
Printable dot grid paper PDF generator.
Set the spacing and the dot size and get a sheet with every dot on an exact pitch. It is graph paper with the lines taken out.
Short answer: choose the paper, a spacing (5 mm and 1/4 in are the common ones, 1 to 100 mm is allowed) and a dot size, then download the PDF and print at Actual size. The dots sit at every crossing of a centred whole-square grid, so A4 at 5 mm gives 37 x 55 = 2,035 dots.
What a dot grid is, and what this one draws
A dot grid is graph paper with the lines removed: a dot sits at every point where the grid lines would cross. You get the alignment help of squares without lines competing with your handwriting, which is why dotted notebooks are popular for journals, lettering and quick sketches. Wikipedia notes that the bullet journal method is partly named for dotted journals, which are gridded with dots rather than lines.
This generator lays the dots on the same whole-square grid as the graph paper page. It divides the printable area by the spacing, keeps whole cells, and puts a dot at each of the (columns + 1) x (rows + 1) crossings, with the whole pattern centred on the page. On A4 with 5 mm spacing and 0.5 in margins that is 37 x 55 = 2,035 dots; on Letter with 1/4 in spacing it is 31 x 41 = 1,271 dots; on Letter with 6 mm spacing it is 32 x 43 = 1,376.
Spacing and dot size
Spacing is the distance between neighbouring dots, centre to centre, and it is exact: 5 mm means 5 mm, not a rounded pixel count. The presets cover 4, 5, 6, 7 and 10 mm and 1/5, 1/4 and 1/2 in; Custom accepts anything from 1 mm to 100 mm. Dot diameter runs from 0.75 pt (0.26 mm) to 3 pt (1.06 mm). The default of 1.25 pt is a little under half a millimetre, large enough to show on a laser printer at 600 dpi and small enough to stay out of the way. A dot may not be wider than half the spacing, so very small spacings reject very large dots with a message.
There is a ceiling of 40,000 dots per page. At 1 mm spacing, the smallest allowed, Letter would need about 48,700 dots, so the generator refuses rather than build a file that is mostly toner; the limit bites at about 1.1 mm. In practice spacing below 3 mm is unusual for anything you write on by hand.
Choosing colour and margins
Grayscale is the default so the sheet prints without colour ink. A mid-gray dot is visible while drawing but easy to ignore when you read the page back. Black makes dots that show through a scan or photocopy; blue and green give a softer look. The page margin defaults to 0.5 in. The optional punch-hole margin is added to the left edge only; with a 0.75 in punch margin on Letter and 1/4 in spacing the grid has 28 x 41 dots instead of 31 x 41.
Printing it
Print at Actual size or 100 percent. Fit to page rescales the dots as well as the PDF, which changes the spacing you chose. If you use the sheet inside a planner or notebook, check the paper size and that duplex printing is off for a blank sheet; a dot grid on both sides is fine but the two sides will not line up unless your printer is very accurate. For a dotted notebook you will staple or bind yourself, set the punch margin first and print a single page to check how the dots meet the binding edge.
Worked example
You want A4 sheets for a hand-lettering practice pad. You choose A4, portrait, 5 mm spacing, a fine 0.75 pt dot, black, 0.5 in margin and 20 pages. The summary reads 37 x 55 = 2,035 dots, 5 mm apart. The PDF is a single 20-page file; each page is exactly 210 x 297 mm and each dot sits on a 5 mm pitch. If you measure the span of any ten gaps with a ruler it is 50 mm.
Common mistakes
- Choosing a dot so large that it reads as a pattern rather than a guide. Stay at or below 1.25 pt for writing.
- Leaving print scaling on Fit to page, which changes the spacing and moves every dot.
- Expecting dots to line up between pages printed on a different day or machine. Printers differ by a fraction of a millimetre.
- Setting a punch margin without checking the hole position on your own punch.
Your settings stay in your browser
Dot positions are computed and painted inside a sandboxed frame, and the PDF is assembled there too, using jsPDF (MIT licence, version 4.2.1). That library is fetched from this site once, the first time you press Download PDF, not when the page opens. The frame has no permission to open connections, so spacing, dot size and the finished file stay on your device. Advertising and analytics belong to the page outside the frame and have no view into it.
What this page does not do
- It does not draw lines, axes, page numbers or borders; the sheet is dots only. Use the graph paper page for squares.
- It does not match a particular brand's notebook. Spacing and dot size are yours to set.
- It cannot compensate for printer scaling or paper that stretches when wet or humid.
Common mix-ups
-
Often assumedISO 216 sets the size of every printed product, including books and posters.
What the source saysISO 216:2007 covers trimmed sizes of writing paper and certain printed matter such as forms and catalogues for administrative, commercial and technical use. ISO says it does not necessarily apply to newspapers, published books, posters or other special items. [1]
Checked against these sources on .
Frequently asked questions
What spacing should I use for dot grid paper?
That is a matter of taste and handwriting size. 5 mm and 1/4 in are the usual starting points: both give about four to five dots per inch. Use 4 mm for smaller writing, or 7 to 10 mm for sketching and lettering practice.
How big should the dots be?
The default is 1.25 pt (0.44 mm) across. Use 0.75 pt if you want the dots to disappear while you write, or 2 to 3 pt for dots you can see from a distance. A dot cannot be wider than half the spacing.
Is this the same as a bullet journal grid?
A bullet journal uses a dotted notebook, and Wikipedia notes the name partly comes from dotted journals gridded with dots. This page makes that kind of sheet, with your own spacing, but it is not tied to any notebook brand.
How many dots will be on the page?
It is (columns + 1) x (rows + 1) of the whole cells that fit. On A4 with 5 mm spacing and 0.5 in margins that is 37 x 55 = 2,035; on Letter with 1/4 in spacing it is 31 x 41 = 1,271. The summary under the preview shows your count.
Can I print dot grid paper on A4 and Letter?
Yes, and on Legal, in portrait or landscape. The PDF page is exactly the paper size you choose. Make sure the paper in the print dialog matches the file.
Why does the generator reject some spacings?
Spacing near 1 mm on a full page needs more than 40,000 dots, which is the limit, and a dot may not be wider than half the spacing. The message under the preview says which limit you hit.
Do the dots line up if I print on both sides?
Only approximately. The two sides use the same grid, but a printer feeds paper with an error of a fraction of a millimetre, so expect the dots on the back to sit slightly off from the front.
Is anything uploaded or watermarked?
No. The PDF is made in your browser and saved to your device. There is no signup and no watermark.
Sources
Retrieved
- Wikipedia: Bullet Journal (dotted journals are gridded with dots rather than lines)
- Wikipedia: Graph paper (regular grid; common spacings)
- Wikipedia: ISO 216 (A4 is 210 x 297 mm; cites the ISO standard)
- Wikipedia: Paper size (North American Letter and Legal; ANSI/ASME Y14.1 drawing sizes)
- jsPDF project page (MIT licence; the PDF library this site vendors)
Each link was opened on the retrieval date and the facts attributed to it were read from it. Sizes, counts and geometry on this page are computed by the code and checked by automated tests.
General information, check the print preview
Dot positions are exact in the PDF; your printer decides how exact they are on paper. TNAADO is not affiliated with Avery, ISO, ANSI, ASME or any standards body named here.