Barcode Tools · Free
QR code labels sheet, one code per CSV row.
Paste a CSV of links or IDs and download a PDF of QR code labels for Avery 5160, 5163, 5164, 5167 or 5395 sheets, or your own layout. Built in your browser.
A QR code on every label, from a spreadsheet
This tool turns a list of values into a print-ready PDF sheet of QR code labels: asset tags, bin and shelf labels, equipment IDs, event tickets, or a page link for every product. Each CSV row becomes one label with a QR code and an optional caption, laid out on an Avery 5160, 5163, 5164, 5167 or 5395 sheet or on dimensions you enter yourself. The codes are generated on your device from the QR Code module grid, so there is nothing to upload and no link that depends on our servers.
Choose the error correction level, the sheet, and whether to outline the labels for a test print. On wide labels such as the 5160 (2-5/8 by 1 inch) the caption goes to the right of the code; on tall or square-ish labels such as the 5163, 5164 and 5395 it goes underneath. Every row appears in the results table with the grid size, the size of one module in millimetres and any warning, so you can see before printing whether a code is going to be small.
What controls scan reliability
Three things matter. The first is module size: the denser the code, the smaller each square on a fixed label, and the module size depends on the amount of data and the error correction level. The second is the margin around the code: Denso Wave's guidance says a margin is required, and this tool leaves a four-module blank border inside the code area on every label. The third is print quality, since low-resolution or smeared prints blur the squares. The error correction level trades density for resilience: the standard's four levels recover about 7% (L), 15% (M), 25% (Q) and 30% (H) of the code, and each step makes the code denser. Denso Wave's page names M at 15% as the usual choice and Q at 25%.
Sheets offered
| Layout | Label (w x h) | Grid | Left / top margin | Pitch across / down |
|---|---|---|---|---|
| Avery 5160 | 2.625" x 1" | 3 x 10 = 30 | 0.1875" / 0.5" | 2.75" / 1" |
| Avery 5163 | 4" x 2" | 2 x 5 = 10 | 0.16" / 0.5" | 4.19" / 2" |
| Avery 5164 | 4" x 3.3333" | 2 x 3 = 6 | 0.16" / 0.5" | 4.19" / 3.3333" |
| Avery 5167 | 1.75" x 0.5" | 4 x 20 = 80 | 0.3" / 0.5" | 2.05" / 0.5" |
| Avery 5395 | 3.375" x 2.3333" | 2 x 4 = 8 | 0.6875" / 0.5625" | 3.75" / 2.52" |
Label size and count per sheet come from Avery's template pages (5160, 5163, 5164, 5167, 5395); margins and pitch were measured from the blank PDF each page offers, rasterised at 300 dpi, good to about 0.01 inch.
Worked example
The sample has three rows on a 5163 sheet, which is 4 by 2 inches. The first value, https://tools.tnaado.ca/, becomes a QR code whose results line reads "25 x 25 modules, each 1.26 mm (0.0497 in). ". The code is placed square and centred above its caption; the second label starts 4.19 inch from the left edge of the page, so there is a 0.19 inch gap between the two columns. If you picked the 5167 instead, whose labels are only half an inch tall, the same value would give a much smaller code, with each module under 0.4 mm and a warning in the table. For a half-inch label, use a short ID or short URL and test-scan before you print the sheet.
Printing
Print the PDF at Actual size on Letter paper. A QR code that has been scaled slightly still scans, but the margins and the caption alignment shift, and a shrink applied by the print dialog also shrinks the modules. Print the calibration page on plain paper first, confirm the 5 inch line, and then test-scan one real label with the phone or scanner that will be used before printing the full sheet.
Common mistakes
- Encoding a long tracking URL on a tiny label. Use a short path on a domain you control.
- Using level H "to be safe" on a small label, which makes the modules smaller. Level M is usually the better compromise.
- Printing in a light colour or on glossy stock that reflects the phone's flash. Black on white matt is the safe choice.
- Skipping the scan test. Always scan a printed label with the phone or scanner that will really be used.
What it does not do
It does not shorten or redirect links, count scans, or check that a URL works. It does not make GS1 Digital Link codes or product barcodes; for EAN, UPC and Code 128 numbers use the bulk barcode label generator. It uses black modules only and does not add logos in the centre, because decoration can make a code unreadable.
Where your data goes
The values you paste are read by your browser, turned into QR module grids by the qrcode-generator library on the page and drawn into a PDF by jsPDF. A sandboxed frame with a strict content security policy (blob and data addresses only) holds the tool, so the browser would block any attempt to send the list anywhere. The ad units on the page are outside that frame. There is no account and nothing is kept after you leave.
Common mix-ups
-
Often assumedThe 2015 ISO edition is the current QR Code standard.
What the source saysISO lists ISO/IEC 18004:2015 as withdrawn and points to ISO/IEC 18004:2024 as the new version. The 2015 text defined the symbology, data encoding, error correction rules and dimensional characteristics. [1]
-
Often assumedA QR code prints at the same size on every Avery sheet.
What the source saysAvery lists the 5164 as shipping labels, 3-1/3 in by 4 in, 6 per sheet, so a code can be large and the modules easy to scan. [2]
-
Often assumedA code fits a half-inch label as well as a large one.
What the source saysAvery lists the 5167 at 1/2 in by 1-3/4 in, 80 per sheet. The code and its blank border must fit inside that half-inch height, so modules shrink with it. [3]
- ISO/IEC 18004:2015 QR Code bar code symbology
- Avery template 5164: shipping labels
- Avery template 5167: return address labels
Checked against these sources on .
FAQ
What should the CSV contain?
One QR code per row. Column 1 is the text or URL to encode and the optional column 2 is a caption printed beside or under the code. A first row of value, url, text, data, qr, code, link or id is treated as a header and skipped.
Which error correction level should I pick?
Denso Wave, the QR Code inventor, says level M (about 15% recoverable) is the most commonly chosen, with Q or H for dirty or damaged environments and L for clean ones with a lot of data. Higher levels make a denser code, so the modules print smaller on a small label.
How big can a code be on a label?
The results table lists the module size in millimetres for every row. This tool warns below 0.4 mm because that is a rule of thumb, not a standard: small modules on a cheap printer blur together and phone cameras struggle. Test-scan a printed label with the phone your users have.
Does it track scans or shorten links?
No. These are static QR codes: the text you give is the text encoded. There is no redirect service, no scan counting and no account, so the codes work as long as the destination does.
What if my text is too long?
A QR code holds a limited amount of data that depends on the error correction level. If a row cannot fit, the row is skipped with a message and the rest still print. Rows over 1000 characters are rejected outright. A short URL or an ID beats a long URL.
How is this different from the bulk barcode label generator?
That tool checks product barcode numbers (EAN-13, UPC-A, Code 128, Code 39) and supports only Avery 5160 and 5163. This one is for QR codes with captions, offers more sheet layouts including 5164, 5167 and 5395, and has a custom-sheet option.
Are my values uploaded anywhere?
No. Codes are drawn in your browser from the module grid and written into the PDF with jsPDF. The tool frame is sandboxed without network access.
Does non-English text scan correctly?
Yes. Text is encoded as UTF-8 bytes, which phone scanners read as typed. The caption under the code is limited to Latin-1 because of the PDF font; the encoded value itself is not.
Sources
Retrieved 2026-11-11: Avery template pages for the sheet sizes and counts, and the ISO listing for ISO/IEC 18004.
- Denso Wave: QR Code error correction: describes the error correction levels and says level M is most frequently selected (fetched 20 Oct 2026).
- Denso Wave: how to generate a QR Code: states that a margin is required around a QR Code and that module size depends on printer and reader (fetched 20 Oct 2026).
- Avery template 5163: 2" x 4", 10 per sheet (fetched 20 Oct 2026).
- Avery template 5164: 3-1/3" x 4", 6 per sheet (fetched 20 Oct 2026).
- Avery template 5167: 1/2" x 1-3/4", 80 per sheet (fetched 20 Oct 2026).
- Avery template 5395: 2-1/3" x 3-3/8" name badges, 8 per sheet (fetched 20 Oct 2026).
- jsPDF project page: the MIT-licensed library that writes the PDF in your browser (fetched 20 Oct 2026).
- RFC 4180, Common Format and MIME Type for CSV Files: the quoting rules the CSV reader follows (fetched 20 Oct 2026).
- MDN: iframe and the sandbox attribute: how a sandboxed frame without allow-same-origin is isolated from its parent page (fetched 20 Oct 2026).