PDF Tools · Free
Name tag labels from a CSV, 8 to a sheet.
Paste a guest list and download a PDF of large, readable name badges for Avery 5395 sheets, with optional title, company and event lines. Built in your browser.
Name tags from a guest list
Hand-writing forty badges is slow and the result is hard to read from a metre away. This page takes a CSV guest list, one person per row, and lays out a name badge for each on the Avery 5395 adhesive badge sheet, eight per Letter page. The name is set in large bold type, sized to fill the badge, with optional lines for a title and a company and an optional event line at the foot. A "HELLO my name is" band is available if you want the classic look. The PDF is made on your device, which matters for a list of real people's names.
Paste the list or open a .csv file exported from a spreadsheet or registration form. A header row is recognised and skipped. The results table shows every row with the font size used for the name or the reason a row was skipped. Preview sheets appear in the page so you can check spelling before any badge stock is used, and the dashed-outline option lets you print a test on plain paper.
Badge sheet geometry
| Layout | Label (w x h) | Grid | Left / top margin | Pitch across / down |
|---|---|---|---|---|
| Avery 5395 | 3.375" x 2.3333" | 2 x 4 = 8 | 0.6875" / 0.5625" | 3.75" / 2.52" |
Label size and count per sheet are from Avery's 5395 page. Margins and pitch were measured from the blank PDF template that page offers, at 300 dpi, so they are good to about 0.01 inch. Labels are 3-3/8 inches wide at a pitch of 3.75 inches, which leaves a 0.375 inch gutter between the two columns, and 2-1/3 inches tall at a pitch of 2.52 inches, which leaves a gap of about 0.19 inch between rows. If your badges are a different size, choose Custom sheet and enter the measurements.
Worked example
The sample list has three people. Alexandra Montgomery is a long name, so it is shrunk to 20.25 pt bold to fit 3.13 inches of usable width, with Head of Partnerships and Acme Ltd below in small type. Sam Lee has a short name and prints much larger, at 40 pt. With the HELLO band and the event line on, the name area sits between the band and the event line. The third badge starts 0.6875 inch from the left edge of the page and 3.0825 inch from the top, which is the second row, first column. A fourth person would fill the second column, and a ninth would start a second sheet.
Printing
Print at Actual size on Letter paper. Adhesive badges cannot be re-fed once printed, so use the dashed-outline version on plain paper to proof spelling and position, and the calibration page to confirm the 5 inch line measures 5 inches. Only then load the badge sheet. Avery's own guidance is that an easy-to-read sans-serif font works best and that the name should be the largest text, which is how this layout is set.
Common mistakes
- Printing the first run on badge stock. Print the outline version on plain paper and check every name before using adhesive badges, which cannot be re-fed.
- Putting the full name, title and company in one cell. One cell is one line, so use separate columns.
- Using a different badge product with the 5395 layout. Sizes differ between brands and between badge families.
- Leaving long titles at full length. Shorten them; the small lines shrink but cannot grow back.
What it does not do
It does not print logos, photos, QR codes or QR check-in codes (for those see the QR label tool), colour, or double-sided badges. It does not connect to a registration system and does not remember your list. It claims no compatibility with any badge product other than the one whose Avery template it was measured from.
Where your data goes
The list stays in your browser. The CSV is split into rows by a small parser, each name is fitted to the badge by measuring the PDF font with jsPDF, and the finished PDF is handed to you as a download from a temporary blob address. The frame is sandboxed with no network permission, and its content security policy admits only blob and data addresses, so the browser would stop any request to a server. Advertising is outside the frame and cannot read your files. Nothing is kept after you close the tab.
Common mix-ups
-
Often assumedA decorative script makes a better name badge.
What the source saysAvery's name tag guide recommends a sans serif font for names readable from a few feet away and says the name should be the largest text on the badge, with smaller type for title or company. [2]
-
Often assumedAny badge product fits the 5395 layout.
What the source saysAvery lists the 5395 as adhesive name badges, 2-1/3 in by 3-3/8 in, 8 per sheet. Other badge products and brands use other sizes, so the layout only matches that product. [1]
Checked against these sources on .
FAQ
Which badge sheet is this for?
Avery 5395 adhesive name badges: 2-1/3 inch by 3-3/8 inch labels, 8 per sheet. The same size is used by several Avery badge products, so check that your pack's product number matches. For any other badge or label stock, choose Custom sheet and type your measurements.
What should the CSV contain?
Column 1 is the name, optional column 2 and column 3 are small lines such as title and company. A header row of name, full name, title, company, organization or role is skipped. Quoted fields with commas are supported.
How does a long name fit?
The name starts at 40 pt bold and shrinks in quarter-point steps until it fits the badge width and its share of the height. Below 12 pt it is shortened with three dots and flagged so you can fix it. A short name stays big for people to read across a room.
What is the HELLO band?
An optional "HELLO my name is" header at the top of the badge. Turn it off to give the name more room.
Can I add an event name or a logo?
An optional event line prints in small type at the bottom of each badge. Logos and images are not supported because the tool draws text only.
Are the names uploaded anywhere?
No. A guest list is personal data, so everything runs in your browser: the CSV is parsed there, the PDF is drawn there, and the tool frame is sandboxed without network access.
What about accents and non-Latin names?
Accented Latin letters print correctly. Names in other scripts cannot be drawn with the built-in PDF font, appear as question marks and are flagged in the results table so you can handwrite or fix them.
Sources
Retrieved 2026-11-11: Avery template 5395 and the Avery name tag guide.
- Avery template 5395: adhesive name badges 2-1/3" x 3-3/8", 8 per sheet, and the blank template used for margins (fetched 20 Oct 2026).
- Avery blog: how to make a name tag: Avery's guidance that a sans-serif font reads best and the name should be the largest text on the badge (fetched 20 Oct 2026).
- jsPDF project page: the MIT-licensed library that writes the PDF in your browser (fetched 20 Oct 2026).
- RFC 4180, Common Format and MIME Type for CSV Files: the quoting rules the CSV reader follows (fetched 20 Oct 2026).
- MDN: iframe and the sandbox attribute: how a sandboxed frame without allow-same-origin is isolated from its parent page (fetched 20 Oct 2026).