Electrical ยท Plug and receptacle configurations
NEMA plug chart and identifier.
Look up a NEMA name, or filter by what you can read on the plug: prongs, blade style, voltage and amps.
Short answer: The number after the hyphen is the amp rating and an L means locking. NEMA 5-15 is 125 V 15 A, 5-20 is 125 V 20 A, L6-30 is 250 V 30 A locking, and 14-50 is 125/250 V 50 A with four prongs. A ground adds a wire, not a pole.
Identify from what is printed
Result
Enter a NEMA name such as L6-30 and press Look up.
Choose at least one option and press Find configurations.
How a NEMA name is built
A NEMA plug or receptacle name has a recognisable shape: an optional L, a number, a hyphen, another number, and sometimes a letter at the end. The L marks a locking connector; the McMaster-Carr catalogue describes the L series as turn-lock connectors whose curved blades lock into place with a quarter turn. The number after the hyphen is the amp rating, and in every table we read it matches the current printed on the part: 15, 20, 30 or 50. The number before the hyphen is the configuration, and it fixes the voltage and the blade arrangement. A trailing P means plug and R means receptacle, so 5-15P is the plug and 5-15R is the outlet it fits.
Read across the tables and the pattern holds: every 5 is 125 V, every 6 is 250 V, every 14 is 125/250 V with a neutral, and the L versions keep the same voltage as their straight-blade cousins. That is why the first identifier lets you type a name we do not list, such as L14-30, and still tells you it is locking, 30 A and configuration 14, while declining to guess the voltage and poles.
The chart
| NEMA | Voltage | Amps | Poles / wires | Blades |
|---|---|---|---|---|
| 5-15 | 125 V | 15 A | 2 / 3 | Straight |
| 5-20 | 125 V | 20 A | 2 / 3 | Straight |
| 6-15 | 250 V | 15 A | 2 / 3 | Straight |
| 6-20 | 250 V | 20 A | 2 / 3 | Straight |
| 6-30 | 250 V | 30 A | 2 / 3 | Straight |
| 6-50 | 250 V | 50 A | 2 / 3 | Straight |
| 10-30 | 125/250 V | 30 A | 3 / 3 | Straight |
| 10-50 | 125/250 V | 50 A | 3 / 3 | Straight |
| 14-30 | 125/250 V | 30 A | 3 / 4 | Straight |
| 14-50 | 125/250 V | 50 A | 3 / 4 | Straight |
| L5-20 | 125 V | 20 A | 2 / 3 | Curved, locking |
| L5-30 | 125 V | 30 A | 2 / 3 | Curved, locking |
| L6-20 | 250 V | 20 A | 2 / 3 | Curved, locking |
| L6-30 | 250 V | 30 A | 2 / 3 | Curved, locking |
Where two or more of McMaster-Carr, Hurricane Electric, Signal+Power and the Wikipedia article on NEMA connectors list the same configuration, their voltage and amps agree; Hurricane Electric calls 125 V "120 volt", the nominal figure for the same rating. Signal+Power lists the 14 series at 125/250 V while Wikipedia gives 250 V, which is the ceiling of that same rating. Poles and wires come from Signal+Power and Wikipedia, which agree.
Poles versus wires
A pole is a current-carrying contact. The ground is a wire but not a pole, so a plug with two hot-or-neutral contacts and a ground is two-pole, three-wire. That is the 5-15, the 5-20, and all the 6 and L5 and L6 types above. The 14-30 and 14-50 carry two hots, a neutral and a ground: three poles, four wires. The 10-30 and 10-50 carry two hots and a neutral with no ground, so three poles and three wires. Signal+Power prints "2 poles" for the 14-series receptacles in one column and "3 poles" for the plugs; since the same configuration cannot change its contacts between plug and outlet, we treat that as an error on that page and use three poles, which follows from the hot, hot, neutral and ground arrangement Wikipedia describes. One search result for "nema plug chart" described the 5-15 as a three-pole, four-wire plug. That is wrong: the 5-15 is two-pole, three-wire.
5-15 versus 5-20
Both are 125 V. The 5-15 is the 15 A household plug and the 5-20 is the 20 A version. A Tripp Lite PDU guide states the 5-15/20R receptacle accepts both 5-15P and 5-20P plugs, and Wikipedia says the same of the T-slot receptacle. Our sources do not say what a receptacle made only for 15 A accepts, so read the face of the outlet instead of assuming. Do not file down or force a plug to make it fit.
Worked example
Hypothetical: you pull a cord off a piece of equipment. It has three straight prongs, and the plug body says 250 V and 20 A. Set prongs to 3, blade style to straight, voltage to 250 V and amps to 20 A. One configuration remains: 6-20. Change the style to curved twist-lock and the answer becomes L6-20. Leave amps and voltage blank, choose 4 prongs, and you get 14-30 and 14-50, which differ only in amp rating. The 6-20 and 5-20 look alike on a chart but are different voltages, so they are not interchangeable.
Common mistakes
- Matching on amps alone. A 20 A plug can be 5-20, 6-20, L5-20 or L6-20; voltage and blade style narrow it.
- Counting the ground as a pole, which gives wrong pole counts.
- Assuming L means "larger". It means locking, and the L5 and L6 types carry the same voltages as 5 and 6.
- Treating the voltage as the circuit you have. A 250 V rating is a ceiling for the part; it does not tell you what the supply provides.
- Swapping connectors to make something fit. This page identifies; it does not tell you how to wire or adapt anything.
Who this is for
People reading a label on a cord, a power strip, a generator or an appliance, and buyers cross-checking a datasheet that lists a NEMA name. It helps with a first identification only.
What this does not cover
- Wiring, circuit sizing or what breaker is needed; for that see the breaker size calculator and a licensed electrician.
- NEMA configurations we do not list, including three-phase types and other locking types. We say so instead of guessing.
- International plug types, which use different standards.
- The exact blade geometry of each configuration. The standard, NEMA WD 6, was not available to us, so the identifier works from names, voltage, amps and prong count.
Frequently asked questions
What is the difference between NEMA 5-15 and 5-20?
Both are 125 V, two-pole, three-wire. The 5-15 is rated 15 A and the 5-20 is rated 20 A. A 5-15/20 receptacle accepts both plugs.
What is an L6-30 plug?
NEMA L6-30 is a locking, twist-lock connector rated 250 V and 30 A. It is two-pole, three-wire: two hot conductors and a ground, with no neutral.
What does the L in a NEMA name mean?
L marks a locking connector with curved blades that lock in place with a quarter turn. L5 types are 125 V and L6 types are 250 V in the tables we read.
What are the specs of a NEMA 14-50?
NEMA 14-50 is rated 50 A and 125/250 V. It has four prongs for two hots, a neutral and a ground, so it is three-pole, four-wire.
What is the difference between 14-30 and 14-50?
Both are four-prong, 125/250 V connectors with two hots, a neutral and a ground. The 14-30 is rated 30 A and the 14-50 is rated 50 A.
What is the difference between poles and wires?
A pole is a current-carrying contact. The ground adds a wire but not a pole, so a plug with two contacts and a ground is two-pole, three-wire.
Is a NEMA 6-20 the same as a 5-20?
No. The 5-20 is rated 125 V and the 6-20 is rated 250 V. They share the 20 A rating only.
What do the P and R at the end of a NEMA name mean?
P stands for plug and R for receptacle, so 5-15P is the plug end and 5-15R is the outlet.
Sources
Retrieved
- Signal+Power: NEMA guide (voltage, amps, poles and wires for common configurations)
- Wikipedia: NEMA connector (naming scheme, poles versus wires, voltage and amps)
- McMaster-Carr: panel-mount NEMA outlets (voltage and amps; turn-lock curved blades)
- Hurricane Electric: power guide (voltage and amps for 5-15, 5-20, L5 and L6 types)
- Tripp Lite via DigiKey: choosing a PDU (5-15/20R receptacle accepts 5-15P and 5-20P)
Identification only โ not wiring advice
This page names and describes plug and receptacle configurations from published tables. It does not tell you how to wire, adapt or replace anything. For electrical work follow local code and use a licensed electrician. TNAADO is not affiliated with NEMA or any company named.