Creator Tools

SRT to VTT converter.

Convert SubRip (.srt) subtitles to WebVTT (.vtt) for the HTML5 video player, or WebVTT back to SRT for editors and platforms that want it. Optionally shift every cue earlier or later. The file stays in your browser.

How to convert SRT to VTT and back

  1. Open a subtitle file or paste its text.
  2. Choose the output: WebVTT or SubRip.
  3. Optionally shift every cue by a number of seconds, using a negative number to move cues earlier.
  4. Copy the output or download it.

What changes between the formats

SRT is the plain format used by most editors and subtitle download sites. WebVTT is the W3C format required by the HTML5 track element and most web players. Converting SRT to VTT adds a WEBVTT header and a blank line and changes the millisecond separator from a comma to a dot. Cue numbers become optional. Converting back reverses this.

The shift option helps when a file is a constant amount out of sync, for example two seconds late. If the timing drifts across the video, use the subtitle re-syncer on this site, which uses two reference points. Check the result in your player, since styling tags and positioning differ between the formats.

Converted on your device

The converter runs in your browser, inside an isolated frame on this page that has no network access. Your file is read and written back by your own device, so it is not uploaded to TNAADO or anyone else, and nothing is stored. The advertising on this page sits outside the frame and cannot see what you choose. Subtitle files are not uploaded.

About this SRT to VTT converter

SRT (SubRip) is the plain format most editors and download sites use. WebVTT is the W3C format the HTML5 <track> element and most web players require. The two are close, which is why conversion is mostly mechanical, but the details below are where hand conversions go wrong.

SRT to VTT

VTT to SRT

Shifting timings

Enter seconds to move every cue later (positive) or earlier (negative), for example 2.5 when the subtitles run 2.5 seconds early. Times never go below zero; cues that would end before the start are removed and the page tells you how many.

Limits

Files up to 5 MB. Both short-hour forms (01:02.500 in VTT) and full forms are read. Block positions or colours in SRT variants such as {\an8} are left in the text, not translated into WebVTT settings.

SRT and WebVTT side by side

One SRT cue, converted to WebVTT with a 2.5 second shift so you can see exactly what changes:

1
00:00:01,000 --> 00:00:03,500
Hello there

becomes, with a +2.5 second shift:

WEBVTT

00:00:03.500 --> 00:00:06.000
Hello there

The converter writes the full HH:MM:SS.mmm form with hours on every timing line, adds the WEBVTT header and a blank line, replaces the decimal comma with a dot, and drops the number line. Going the other way it numbers cues from 1 and writes commas. Because the shift in this example is +2.5 s, a cue at 1.000 to 3.500 seconds becomes 3.500 to 6.000.

Why you cannot just rename .srt to .vtt

The WebVTT specification says a file must be encoded as UTF-8, labelled with the MIME type text/vtt, and start with the string WEBVTT (an optional byte order mark may come first). A renamed SRT has no header and still uses decimal commas, so strict parsers reject it. The conversion is simple, but doing it by hand across hundreds of cues is where mistakes creep in, which is why a tool is safer.

Using the file in a web page

The <track> element points at the .vtt file inside a <video>: <track default kind="captions" srclang="en" label="English" src="captions.vtt">. MDN notes that the track’s source must have the same origin as the page unless the video element carries a crossorigin attribute, and that srclang is required when the kind is subtitles. If captions do not appear, check the file path, the header line, the character encoding and the MIME type your server sends.

Fixing out-of-sync subtitles

Enter a shift in seconds to move every cue by the same amount. If the captions appear 2 seconds late, use -2; if 0.4 seconds early, use 0.4. A fixed offset cannot cure progressive drift, where the captions start in sync and gradually slide, which usually means the subtitle file was timed for a different frame rate than your video. Check the start and the end of the film before deciding which problem you have.

What is kept, changed or dropped

Worked example: WebVTT to SRT

Given 00:01.000 --> 00:03.000 align:start followed by <v Anna>Good morning., the converter expands the short time form, strips the cue setting and the voice tag, and writes cue number 1 as 00:00:01,000 --> 00:00:03,000 with the text “Good morning.” If you need to keep the speaker, type the name into the text before converting.

The conversion runs entirely in your browser and the file is never uploaded. To review reading speed and cue length after converting, use the subtitle QA checker.

Frequently asked questions

Why does my video player need VTT instead of SRT?

The HTML5 <track> element only accepts WebVTT. Converting your .srt to .vtt and pointing the track's src at it is enough for most players.

Do I lose any formatting when converting VTT to SRT?

Positioning, alignment, styles and speaker voice tags are lost because SRT cannot store them. Timings and text are kept.

Is my subtitle file uploaded?

No. Conversion happens in your browser.

What is the difference between SRT and WebVTT?

SRT is a plain numbered-cue format with comma-separated milliseconds, while WebVTT is a W3C format that starts with a WEBVTT header, uses a dot before milliseconds, and supports cue settings, styles and metadata. Browsers’ HTML5 track element uses WebVTT.

How do I convert WebVTT to SRT?

Paste the .vtt text or open the file, choose SRT as the output, and copy or download the result. The tool removes the header, notes, styles and cue settings, numbers the cues from 1 and changes dots to commas.

Can I simply rename an .srt file to .vtt?

No. A WebVTT file needs a WEBVTT header line and dots in the timestamps, so a renamed SRT is rejected by strict parsers. Convert it properly instead.

Why does my .vtt file not load in the video player?

Common causes are a missing WEBVTT header, a file that is not UTF-8, a server that does not send the text/vtt content type, or a track file on a different origin without cross-origin access set up on the video element. Check these before changing the captions.

How do I fix subtitles that are out of sync?

Enter a time shift in seconds, positive to show cues later and negative to show them earlier, then convert. This fixes a constant offset only; if the captions slowly drift, the subtitle file was timed for a different frame rate.

Sources and retrieval dates

Re-verified 26 October 2026: the W3C WebVTT specification (WEBVTT header, full stop before milliseconds, optional cue identifiers, text/vtt and UTF-8) and the MDN track element page (WebVTT source files, srclang for subtitles).

Advertisement
Advertisement