YouTube · chapters · timestamps
YouTube chapter validator.
Paste rough timestamps, get a clean block and a pass/fail against YouTube’s chapter rules. Nothing is uploaded, and no transcript or AI is involved.
Paste your chapters
Result
Paste timestamps to see checks.
What the checks mean
YouTube’s help page says to make the first timestamp 00:00, list at least three timestamps in ascending order, and keep each chapter at least 10 seconds long. This tool applies exactly those rules. Timestamps at or past the video length, and a missing chapter title, are extra sanity checks (titles are advisory only).
A pass confirms the format only. It does not guarantee chapters will display: YouTube notes that the feature depends on your channel’s access and status. Once any chapter reaches one hour, the clean block uses h:mm:ss for every line.
Open YouTube Help: Video Chapters
The three rules YouTube publishes
YouTube’s Help article on Video Chapters is short, and a chapter list that breaks any of its rules is ignored rather than partly applied. To add chapters yourself, you list timestamps and titles in the video description, and the article says: make sure the first timestamp starts at 00:00, list at least three timestamps in ascending order, and note that the minimum length for a chapter is 10 seconds. Those are the only hard rules the validator enforces, and it reports each failure against the line that caused it so you can fix the exact timestamp.
How each check works
- Starts at 00:00: the first timestamp in your list must be zero. A list that begins at 0:05 because the real content starts after a brief cold open will fail.
- At least three: two timestamps are not enough, however long the video is.
- Ascending order: every timestamp must be later than the previous one. A repeated or earlier time is an error on the line that breaks the order.
- Ten seconds minimum: the gap to the next timestamp must be at least 10 seconds. If you enter the video length, the last chapter is measured against it too, and any timestamp at or past the end is flagged.
- Valid clock values: seconds and minutes must be below 60, so
1:75is an error rather than a guess. - Titles: a missing title is shown as advisory only, because the published rules do not require one. Write one anyway, since the title is what viewers see.
Worked examples
A passing list: 0:00 Intro, 1:05 Setup, 2:30 Demo, 5:42 Wrap-up with a video length of 8:15. The chapters last 65, 85, 192 and 153 seconds, so every rule is met. A failing list: 0:05 Intro, 0:10 Setup, 0:15 Demo. The first timestamp is not 00:00, and the first two chapters are only 5 seconds long, so the validator reports three errors. Changing the first line to 0:00 Intro and spacing the others at least 10 seconds apart (for example 0:00, 0:20, 0:45) clears them. The tool also accepts bullets, dashes and brackets around timestamps, such as - 2:30 - Demo, and rewrites everything into one clean block you can paste into the description.
Minutes and hours
Use m:ss while the whole list stays under an hour. As soon as any chapter reaches one hour, the clean block uses h:mm:ss for every line, so the list stays consistent. If you give the video length and it is an hour or more, the same format is used. Never write timestamps in decimal minutes: 2.5 is not 2 minutes 30 seconds.
Why chapters can still fail to appear
A pass means your formatting satisfies the published rules, and it does not guarantee that chapters show. YouTube notes that if you do not yet have access to chapters you may need to apply for access to advanced features, and that automatic chapters are not available when the channel has active strikes or the content may be inappropriate for some viewers. Adding your own timestamps overrides automatic video chapters, and creators can opt out of the automatic ones in YouTube Studio. If the format is right and nothing shows, check that the description saved, that the timestamps are in the description (not only a pinned comment), and your channel’s access and status.
Practical tips for useful chapters
Put the strongest section titles first, since viewers scan the list. Keep titles short and specific, such as “Setup” or “Price comparison”, and avoid chapters that are barely longer than the minimum unless a short section really is a separate topic. For the rest of the upload metadata, use the YouTube title, description and tags checker, and for captions check cue timing with the subtitle QA checker. The text you paste stays in your browser; nothing is uploaded, no transcript is read and no AI is involved.
Frequently asked questions
Why are my YouTube chapters not showing?
The usual causes are a first timestamp that is not 00:00, fewer than three timestamps, timestamps out of order, or a chapter shorter than 10 seconds. If the format is correct, the channel may not have access to chapters, or an active strike or content flags may make the feature unavailable.
Does the first YouTube chapter have to be 00:00?
Yes. YouTube’s Help article says the first timestamp you list must start at 00:00, so a list that begins at 0:05 or 0:01 does not meet the rule.
How many chapters do I need on YouTube?
You need at least three timestamps listed in ascending order. A list with only two entries will not create chapters, however long the video is.
What is the minimum length of a YouTube chapter?
The minimum length is 10 seconds. If you enter the video length in this tool, the last chapter is also measured against the end of the video.
What format should YouTube timestamps use?
Put the timestamp at the start of a line followed by the title, using m:ss for videos under an hour and h:mm:ss once any chapter reaches an hour. This tool normalises bullets, dashes and spacing into one clean block you can paste into the description.
Do my own timestamps replace automatic chapters?
Yes. YouTube states that adding timestamps in the description overrides automatic video chapters, and creators can also opt out of automatic chapters in YouTube Studio.
Does a pass guarantee that chapters will appear?
No. A pass confirms the format only. YouTube notes the feature depends on your channel’s access and status, and it may be unavailable if the channel has active strikes.
Sources and retrieval dates
Re-verified 26 October 2026: the first-timestamp 00:00, three-timestamp, ascending-order and 10-second rules on the Video Chapters page, and that “Add chapters” is listed among the features that depend on channel access.
- YouTube Help: Video Chapters — first timestamp 00:00, at least three timestamps in ascending order, 10-second minimum, override of automatic chapters, eligibility notes (retrieved 2026-10).
- YouTube Help: Learn about feature access for YouTube Creators — lists “Add chapters” among the features that depend on channel access (retrieved 2026-10).
The h:mm:ss display and line-format handling described above are how this tool behaves, not YouTube rules.