Winter heating · Pellet stoves
What does a pellet stove cost per hour to run?
Enter what a bag of pellets costs and how many pounds per hour your stove burns. You get cost per hour, per day and for a stretch of the season, plus bags and tons to buy.
Short answer
A 40 lb bag at $7.50 (example price, not market data) is $0.1875 per pound, or $375 per ton. A stove burning 1.5 lb per hour then costs $0.28 per hour. Run 12 hours a day for 30 days and that is 540 lb, 13.5 bags and $101.25.
Inputs
Result
Enter your numbers.
How this is calculated, with a worked example
The cost per hour is just the burn rate times the price per pound: bag price divided by bag weight, times pounds burned per hour. The Btu figure only matters for comparing fuels: price per pound divided by Btu per pound, times 1,000,000, gives cost per million Btu of fuel, the same basis as the wood vs pellet vs gas comparison.
Worked example. A 40 lb bag at $7.50 (illustrative) is 7.50 / 40 = $0.1875 per pound, and 2,000 lb of it is $375 per ton. A stove burning 1.5 lb per hour costs 1.5 x $0.1875 = $0.28 per hour. At 8,000 Btu per lb the fuel costs $23.44 per million Btu, and the stove draws 1.5 x 8,000 = 12,000 Btu per hour of fuel energy. Twelve hours a day for 30 days burns 540 lb: 13.5 bags, 0.27 tons, $101.25.
Where the heat content comes from. EIA's Btu table does not list wood pellets. The one U.S. Department of Energy-hosted source we could open, a 2014 forum presentation, says the average wood pellet has about 8,500 Btu per pound, and retail bags state different figures depending on moisture. The tool defaults to a conservative 8,000 and lets you change it. The burn rate is what your stove actually consumes; many stoves burn far less on low than on high, so cost per hour is a range across the heat settings.
Constants and sources are current as of 26 October 2026.
Common mix-ups
-
Often assumedEvery bag of wood pellets holds the same amount of heat per pound.
What the source saysA U.S. DOE-hosted 2014 presentation gives about 8,500 Btu per pound as the average wood pellet, an average rather than a fixed value, so use the heat content your bag or stove maker states if it prints one. [1]
Checked against these sources on .
Frequently asked questions
How much does it cost to run a pellet stove per hour?
Burn rate in pounds per hour times the price per pound. A stove burning 1.5 lb per hour on pellets at $0.1875 per lb costs about $0.28 per hour; your price and burn rate change that.
How many pellets does a stove burn per hour?
It depends on the stove and heat setting, and the manual lists it. This tool takes your burn rate as an input instead of assuming one.
How many Btu are in a pound of wood pellets?
A U.S. DOE-hosted 2014 presentation gives about 8,500 Btu per pound for the average pellet. Bag labels vary with moisture, so the field is editable and defaults to 8,000.
How many bags are in a ton?
A ton is 2,000 pounds, so a 40 lb bag is 50 bags per ton.
Is the heat input the same as the heat I feel?
No. Heat input is the energy in the pellets burned. The stove's efficiency decides how much reaches the room, and this calculator does not assume one.
Sources
Checked
- U.S. DOE-hosted presentation (Biomass Renewable Energy Opportunities and Strategies Forum, 9 July 2014): average wood pellet about 8500 Btu per pound
- U.S. EIA: British thermal units (Btu), sample conversion factors for heating oil, propane, natural gas, wood, electricity
Runs entirely in your browser. Nothing you type is sent or stored.
Not professional advice
Prices, burn rates and pellet quality vary. Install and operate a pellet stove following its manual and local codes. This is a planning estimate only.