Home Energy · Holidays 2026

Christmas lights electricity cost.

Enter total watts, hours per night and nights lit. Add a second set to compare, for example LED against incandescent.

Short answer: cost = watts ÷ 1,000 × hours × nights × price per kWh. At the EIA U.S. average residential price of 18.16 cents per kWh (August 2026), 500 W of lights for 6 hours a night over 35 nights uses 105 kWh and costs about $19.07.

Source: EIA Electric Power Monthly, Table 5.6.A (released October 23, 2026)Retrieved October 26, 2026

Advertisement

Your lights

Add the watts on every set you plan to run at once.

Default is the U.S. average residential price for August 2026. Use the price on your own bill if you have it.

Result

Enter your details and press Calculate.

Advertisement

The arithmetic

A watt is a rate of using energy, and a kilowatt-hour is that rate sustained for an hour at 1,000 watts. So the energy used is watts divided by 1,000, times the hours lit each night, times the number of nights. Multiply the kilowatt-hours by your price per kilowatt-hour and you have the cost. Nothing else changes the answer: the colour, the number of bulbs and the brand matter only through the total watts printed on the tag.

That is why the second-set field is useful. Put your old incandescent total in the first box and a replacement LED total in the second and the page shows the gap in dollars for the same hours and nights.

The price per kilowatt-hour

The default of 18.16 cents is the national average residential price in the U.S. Energy Information Administration's Electric Power Monthly, Table 5.6.A, released October 23, 2026. It covers August 2026 and the EIA marks 2026 values as preliminary estimates; the August 2025 figure in the same table was 17.57 cents. The table is a state-by-state list, and the spread is wide: Connecticut is 24.51 cents and Hawaii 47.18 cents in the August 2026 column. If you live in either, use your own rate rather than the national average.

Worked example

You light 500 W of incandescent sets for 6 hours a night over 35 nights. Energy: 500 ÷ 1,000 × 6 × 35 = 105 kWh. Cost at 18.16 cents: 105 × 0.1816 = $19.07, or $0.54 per night. Swap in 50 W of LED sets for the same hours and nights and the energy is 10.5 kWh, which costs $1.91, a difference of $17.16. The wattages here are example values chosen to keep the arithmetic easy to follow; your tags decide yours.

What the Department of Energy says about LEDs

The Department of Energy's explainer on holiday lights says LED strands consume 70 percent less energy than conventional incandescent strands. The same article gives its own cost illustration for a six-foot tree. The article is undated, so treat its dollar figures as an illustration and use the calculator above with your own watts and rate.

Sources and how this is calculated

Energy (kWh) = watts ÷ 1,000 × hours × nights. Cost = kWh × cents per kWh ÷ 100. Retrieved October 26, 2026. The page does not add taxes, fixed monthly charges or tiered rates; some utilities charge more per kWh once you pass a usage threshold, and a bill may include delivery charges that raise the effective price.

Advertisement

Common mix-ups

  1. U.S. Department of Energy: How do holiday lights work?
  2. EIA Electric Power Monthly, Table 5.6.A: average price of electricity by sector and state

Checked against these sources on .

Frequently asked questions

How much does it cost to run Christmas lights?

Multiply total watts by hours lit and nights, divide by 1,000 for kWh, then multiply by your price per kWh. For 500 W, 6 hours, 35 nights at 18.16 cents per kWh the cost is about $19.07.

What electricity price should I use?

Use the price on your bill. If you do not have it, the EIA U.S. average residential price for August 2026 is 18.16 cents per kWh, but state averages range widely.

Do LED Christmas lights really cost less?

The Department of Energy says LED strands consume 70 percent less energy than conventional incandescent strands. Compare your own tags with the second-set field.

How do I find the watts of my lights?

The tag near the plug lists watts or amps. Multiply amps by 120 to get watts.

Does this include timers or dimmers?

Timers only change the hours, so set the hours to what the timer allows. Dimmers lower the real draw below the tag watts, which this tool cannot know.

Will my bill show this exact amount?

Not necessarily. Tiered rates, delivery charges and fixed fees can raise or lower the cost per kWh, so the result is an estimate.

Estimate only

Energy figures are as of the EIA release of October 23, 2026 and are preliminary. Your utility bill is the authority on your rate.