SEO · Content Calculator
Words to pages, and back.
Pick your font, size, spacing and margins and get an estimated page count for a word count, or the words that fill a set number of pages. It is an estimate shown as a range. Nothing leaves this page.
Document
Estimate
Word count to pages (and pages to words)
With 12 pt Times New Roman, double spacing and 1-inch margins on US Letter, a page holds about 345 to 360 words of continuous prose. So 1,500 words is roughly 4.1 to 4.4 pages, 10 pages is about 3,450 to 3,615 words, and 5 pages is about 1,725 to 1,800 words. Titles, headings, block quotes, lists and images lower the real count per page, and your word processor's own page count is final. Get an exact count first with the word count checker, then enter it here.
How the estimate is made
Worked example: 1,500 words in 12 pt Times New Roman, double spaced, 1-inch margins on US Letter. The text is 6.5 in wide (39 times the font size), which fits about 15 words per line; the 9-inch text height holds 23 double-spaced lines, so a page holds about 350 words and 1,500 words come to roughly 4.1 to 4.4 pages.
- Words per line: text width divided by the average width of a word plus its space, minus the words lost to ragged line ends and short last lines of paragraphs.
- Lines per page: text height divided by (font size × the font's own line height × spacing), rounded down.
- Where the constants come from: measured on 2026-09-30, not recalled. Glyph widths were read from the Times New Roman, Arial, Georgia, Verdana and Courier New font files over the full text of three public-domain books from Project Gutenberg: Pride and Prejudice, Moby-Dick and Frankenstein. Line height is (ascender − descender + line gap) divided by units per em from each font's table. The low and high ends of the range are the lowest and highest of the three books.
- Paper: US Letter is 8.5 x 11 in; A4 is 210 x 297 mm (ISO 216).
- Why it is only an estimate: headings, title blocks, indents, block quotes, lists, tables and images take space, and word processors differ slightly in line height. Widely quoted "250 to 300 words per page" figures for double-spaced 12 pt are rules of thumb that include those effects; this calculator measures continuous prose only, so expect real documents to land below its numbers. Your own word processor's count is final.
Words to pages FAQ
How many words is one page?
It depends on the font, size, line spacing and margins. With 12 pt Times New Roman, double spacing and 1-inch margins on US Letter, this calculator estimates about 345 to 360 words per page of continuous prose; titles, headings, quotes, lists and images lower the real count.
Why does it show a range instead of one number?
Word length, paragraph length and dialogue change where lines wrap. The range reflects measurements across three public-domain books and is an estimate, not a formatting rule.
How were the numbers worked out?
Word widths were measured from font files over Pride and Prejudice, Moby-Dick and Frankenstein. Line height comes from each font's metrics, and the method is documented on this page.
Does my page count in Word or Google Docs match?
It should be close for the listed fonts but not exact because word processors use slightly different line heights and may substitute fonts. Use the real document when a page limit is strict.
Is a word counted the same way as in the Word Count Checker?
Yes. A word is a run of characters between spaces or line breaks. Use the Word Count Checker for the exact count, then enter that number here.
Is my data uploaded?
No. Everything is calculated in your browser.
How many words is 10 pages double spaced?
With 12 pt Times New Roman, 1-inch margins and double spacing on US Letter, this calculator estimates about 3,450 to 3,615 words for ten pages of continuous prose. Subtract space for the title page, headings, block quotes and references, which add pages without adding body words, and the realistic body length is lower.
Why does the rule of thumb say 250 words per page but this shows about 350?
The 250-word figure is a rough rule for double-spaced academic writing and builds in headings, indents and uneven paragraphs. This calculator measures continuous prose only, using real glyph widths and line heights, so it shows the upper bound for plain text. A document with many headings, lists or short paragraphs will fall between the two numbers.
Words per page for common settings
The table below was produced by running this calculator's own model for each combination on US Letter paper with 1-inch margins unless noted. Each cell is the low-to-high range across the three measured books, rounded to the nearest word, for continuous prose with no headings, images or extra paragraph spacing.
| Setting | Lines per page | Words per page |
|---|---|---|
| 12 pt Times New Roman, double spaced | 23 | 345 to 362 |
| 12 pt Times New Roman, single spaced | 46 | 689 to 723 |
| 11 pt Arial, single spaced | 51 | 760 to 795 |
| 11 pt Arial, double spaced | 25 | 372 to 390 |
| 11 pt Georgia, 1.5 spacing | 34 | 508 to 532 |
| 12 pt Courier New, double spaced | 23 | 238 to 247 |
| 12 pt Times New Roman, double, A4 paper | 25 | 363 to 380 |
| 12 pt Times New Roman, double, 1.25 in side margins | 23 | 321 to 335 |
| 12 pt Times New Roman, double, 0.5 in margins all round | 26 | 444 to 468 |
Two patterns are worth noticing. Halving the margins on every side (1 inch to 0.5 inch) adds roughly 30 percent more words per page, and a monospaced font such as Courier New fits about a third fewer words than Times New Roman at the same size, because every character is as wide as the widest. That is why "how many pages is my word count" has no single answer: the same 3,000 words can be six pages or twelve depending on the document settings.
Worked examples with real numbers
Words to pages: a 1,500-word essay
For 12 pt Times New Roman, double spaced, 1-inch margins on US Letter, the calculator finds 23 lines per page and about 15 words per line, so a page holds about 345 to 362 words. Dividing 1,500 by the high end (362) gives 4.15 pages; dividing by the low end (345) gives 4.35 pages. A page limit of "4 pages" is therefore tight for 1,500 words of unbroken prose, and a title block or heading will push the text onto a fifth page.
Pages to words: a 10-page paper
Ten double-spaced Times New Roman pages hold about 3,450 to 3,615 words of continuous prose. Real papers land lower, because the title page, block quotes, headings, tables and the reference list use space without adding body words. If a brief says "10 pages" and the title page and references take two of them, plan for the body to fill eight pages, which is closer to 2,760 to 2,900 words at the same settings.
Changing the font changes the answer
The same 3,000 words in 11 pt Arial with double spacing take 7.7 to 8.1 pages, while in 12 pt Times New Roman with double spacing they take about 8.3 to 8.7 pages. Sans-serif fonts are wider, but the smaller 11 pt size more than makes up for it here. The point is not which font is "better" but that a page limit is only comparable between documents that share settings.
Formatting rules that fix the settings
Many assignments name a style guide instead of a font. For APA, Purdue OWL's summary of the style says an essay should be double-spaced throughout with 1-inch margins on all sides, and lists several acceptable fonts, including 12-point Times New Roman and 11-point Arial and Georgia. Those are exactly the presets in the dropdown above, so choose the matching preset first and read the estimate from there. When an instructor, publisher or journal gives different instructions, theirs override any general guide, so enter their margins and spacing manually.
Common mistakes
- Using the "250 words per page" rule for every document. It is a rule of thumb for double-spaced academic text that already allows for headings and ragged lines. For continuous 12 pt Times New Roman prose this calculator measures about 345 to 362 words, so applying 250 will overstate the page count of plain text and understate it for text with many headings and lists.
- Counting the whole file. Cover pages, abstracts, reference lists, footnotes and appendices usually sit outside the word limit but inside the page limit, or the other way round. Check which one the brief limits.
- Trusting a page count from a different program. Word processors compute line height slightly differently and may substitute a missing font, so a document can reflow when opened elsewhere. For a hard limit, look at the page count in the program you will submit from.
- Ignoring paragraph spacing. The model counts lines only. Extra space before or after each paragraph, which some word-processor styles add by default, makes each page hold fewer lines, so set paragraph spacing to zero if you want the estimate to apply.
Who this is for, and what it does not cover
It suits students checking a length requirement, writers sizing a manuscript chapter, and editors turning a page quota into a word target. It does not model book trim sizes, two-column layouts, text wrapped around images, tables, footnotes, headers and footers, right-to-left scripts or East Asian text, and its font constants were measured on English prose only. For an exact count of what you have already written, use the Word Count Checker; to see how hard the text is to read at that length, try the Readability Checker.
Sources
- Purdue OWL: APA general formatDouble-spaced text, 1-inch margins and the list of recommended fonts, including 12-point Times New Roman. Retrieved 2026-10.
- Project Gutenberg: Pride and PrejudiceOne of the three public-domain books used to measure average word width. Retrieved 2026-10.
- Project Gutenberg: Moby-DickSecond measurement text. Retrieved 2026-10.
- Project Gutenberg: FrankensteinThird measurement text. Retrieved 2026-10.
Each source was opened and checked against the statements above in October 2026. Standards and vendor documentation change; follow the links for the current text.