Lab units · hemoglobin

Hemoglobin converter, g/dL to g/L.

Convert hemoglobin (Hb, Hgb) between g/dL (US), g/L (Canada, UK, Australia, Europe) and mmol/L (some European laboratories).

g/L = g/dL × 10mmol/L = g/dL × 0.6206

How to use the converter

  1. Type your value in either box. The other box updates as you type.
  2. Choose the test or direction first if the page offers a choice.
  3. Compare the result with the reference ranges printed on your own lab report.

Why the units differ

Hemoglobin, also written haemoglobin, Hb or Hgb, is reported in grams per decilitre in the United States, in grams per litre in Canada, the UK, Australia and much of Europe, and occasionally in mmol/L by some European laboratories. Converting between g/dL and g/L is just a factor of ten.

The mmol/L figure depends on how the laboratory counts: most use the haem iron basis, but a few report per whole tetramer, which gives a figure one quarter as large. Check the unit note on your report before you rely on a mmol/L conversion, and use the page's selector to choose the one you need.

Typed values stay on your device

Lab values are personal health information. The arithmetic runs in an isolated frame on this page that has no network access, so what you type is not uploaded, saved or shared. The advertising on this page loads outside the frame and cannot read the boxes.

Please note

This page converts units only. It does not interpret a result, diagnose anything or replace advice from your clinician. Reference ranges depend on the laboratory, age, sex and circumstances, so always use the range printed on your own report.

How the conversion works

Hemoglobin is reported as mass per volume, so g/dL to g/L is simply × 10. Laboratories that report in mmol/L usually count haem iron: 1 g/dL = 0.6206 mmol/L based on a relative molecular mass of 16 114.5 per haem unit, so mmol/L = g/dL × 0.6206. Be aware that a few laboratories report mmol/L per whole tetramer (64 458 g/mol), which is one quarter of the figure; check the unit note on your report.

Worked example

13.5 g/dL = 135 g/L = 13.5 × 0.6206 = 8.38 mmol/L (iron basis).

Hemoglobin conversion chart

g/dLg/Lmmol/L (iron basis)
8 g/dL80 g/L4.96 mmol/L
10 g/dL100 g/L6.21 mmol/L
12 g/dL120 g/L7.45 mmol/L
13.5 g/dL135 g/L8.38 mmol/L
15 g/dL150 g/L9.31 mmol/L
17 g/dL170 g/L10.55 mmol/L

Why there is no normal range here

Ranges depend on age, sex, pregnancy, altitude and the laboratory. The WHO publishes its anaemia thresholds in its 2024 haemoglobin guideline; this page converts units only and does not screen for anaemia.

Sources

Mass-to-molar factors follow standard clinical-chemistry unit tables, with the haem molecular mass from NIH PubChem (haem B).

Frequently asked questions

How do I convert hemoglobin from g/dL to g/L?

Multiply by 10. For example 12.5 g/dL is 125 g/L.

How do I convert g/dL to mmol/L?

Multiply by 0.6206 (iron basis). For example 14 g/dL is 8.69 mmol/L.

Is hematocrit the same unit?

No. Hematocrit is a percentage or a fraction (L/L), not a mass concentration, so it does not convert this way.

Do I have anaemia?

This page cannot say. Only a clinician with your full results can interpret them.

Converting back, and where the 0.6206 comes from

To go from g/L to g/dL, divide by 10. To go from mmol/L (iron basis) back to g/dL, divide by 0.6206. Using different values from the chart above:

Reverse conversions
You haveg/dLg/Lmmol/L (iron basis)
105 g/L10.51056.52
9.0 mmol/L14.51459.0

The factor is not arbitrary. One g/dL is 10 g/L, and 10 g/L ÷ 16,114.5 g/mol (the molecular mass the page uses per haem unit) is 0.0006206 mol/L, which is 0.6206 mmol/L. If your report gives mmol/L per whole tetramer instead, the number is about a quarter of this one: 13.5 g/dL would read about 2.1 mmol/L, not 8.38.

What the number does not tell you

A bare number with no unit is easy to misread. The same blood result can be written as 135 (g/L), 13.5 (g/dL) or 8.38 (mmol/L), so always copy the unit with the value. Converting only changes how the measurement is written. It does not say whether the result is high, low or normal; the lab’s own reference range, printed on your report, does that.

Reference information, not medical advice

This page converts units only. It does not interpret a result, and units and reference intervals differ between laboratories. Ask the clinician who ordered the test or the reporting laboratory what a result means for you. If you are worried about a result or symptoms, contact a health professional; in an emergency call your local emergency number.

Advertisement
Advertisement