Lab units · creatinine
Creatinine converter, mg/dL to µmol/L.
Convert a serum creatinine value between mg/dL (US) and µmol/L (Canada, UK, Europe, Australia). The factor is 88.4. This page does not calculate eGFR or judge kidney function.
How to use the converter
- Type your value in either box. The other box updates as you type.
- Choose the test or direction first if the page offers a choice.
- Compare the result with the reference ranges printed on your own lab report.
Why the units differ
Serum creatinine is reported in mg/dL in the United States and in micromoles per litre (µmol/L) in Canada, the UK, Australia and Europe. The conversion factor is 88.4, so a value of 1.0 mg/dL is about 88 µmol/L. Knowing the factor lets you read lab results from either system and move between them.
This page does not calculate eGFR or judge kidney function. Those estimates depend on age, sex and the equation used by your laboratory, and they should be interpreted by a clinician. Use this converter only to restate the same creatinine measurement in the other unit.
Typed values stay on your device
Lab values are personal health information. The arithmetic runs in an isolated frame on this page that has no network access, so what you type is not uploaded, saved or shared. The advertising on this page loads outside the frame and cannot read the boxes.
Please note
This page converts units only. It does not interpret a result, diagnose anything or replace advice from your clinician. Reference ranges depend on the laboratory, age, sex and circumstances, so always use the range printed on your own report.
How the conversion works
Creatinine has a molar mass of 113.12 g/mol. Converting mg/dL to mg/L (× 10) and dividing by the molar mass gives micromoles per litre: 10 000 ÷ 113.12 = 88.4. So µmol/L = mg/dL × 88.4 and mg/dL = µmol/L ÷ 88.4.
Worked example
1.0 mg/dL = 1.0 × 88.4 = 88 µmol/L. 100 µmol/L = 100 ÷ 88.4 = 1.13 mg/dL.
Creatinine conversion chart
| mg/dL | µmol/L |
|---|---|
| 0.5 mg/dL | 44 µmol/L |
| 0.7 mg/dL | 62 µmol/L |
| 0.9 mg/dL | 80 µmol/L |
| 1.0 mg/dL | 88 µmol/L |
| 1.2 mg/dL | 106 µmol/L |
| 1.5 mg/dL | 133 µmol/L |
| 2.0 mg/dL | 177 µmol/L |
| 3.0 mg/dL | 265 µmol/L |
| 5.0 mg/dL | 442 µmol/L |
What this page does not do
Creatinine is one input to estimated kidney-function equations, and those also use age, sex and a calibration that differs by laboratory. This tool does not compute eGFR and does not say whether a value is high or low, because ranges differ by lab, muscle mass, age and sex. Use the range printed on your laboratory report.
Chart: µmol/L to mg/dL
| µmol/L | mg/dL |
|---|---|
| 50 µmol/L | 0.57 mg/dL |
| 70 µmol/L | 0.79 mg/dL |
| 90 µmol/L | 1.02 mg/dL |
| 110 µmol/L | 1.24 mg/dL |
| 150 µmol/L | 1.70 mg/dL |
| 200 µmol/L | 2.26 mg/dL |
| 300 µmol/L | 3.39 mg/dL |
| 500 µmol/L | 5.66 mg/dL |
What the numbers are. Each row divides by 88.4, the factor from the section above. A Canadian or UK lab prints the left column; a US lab prints the right one. The same blood sample gives the same physical amount of creatinine in both, only the unit changes.
Worked example: reading a report from another country
A US lab reports 1.3 mg/dL. 1.3 × 88.4 = 114.9 µmol/L. An earlier Canadian report said 80 µmol/L. Both numbers are now in µmol/L, so the change is 114.9 − 80 = 34.9 µmol/L, or about 0.39 mg/dL. Without converting first, “1.3 versus 80” looks like a jump of 79 and is not.
How much does rounding matter?
One tenth of a mg/dL is 0.1 × 88.4 = 8.84 µmol/L. The reverse is smaller: 1 µmol/L is 1 ÷ 88.4 = 0.0113 mg/dL. So a US report to one decimal place is a coarser measurement than a µmol/L report to the whole number. When you convert 1.0 mg/dL to 88 µmol/L and back you get 0.995, which prints as 1.0, so round-trips are stable at the precision labs actually report.
What it does not show. The chart converts a unit. It does not tell you whether a value is normal for your age, sex or muscle mass, and it is not an eGFR. Ask your clinician or the reporting lab what the range means for you.
Sources
Molar mass from NIH PubChem; the 88.4 factor is the standard SI conversion used in laboratory reporting.
Frequently asked questions
How do I convert creatinine from mg/dL to µmol/L?
Multiply by 88.4. For example 1.2 mg/dL × 88.4 = 106 µmol/L.
How do I convert µmol/L to mg/dL?
Divide by 88.4. For example 70 µmol/L ÷ 88.4 = 0.79 mg/dL.
Is µmol/L the same as umol/L?
Yes. µ is the Greek letter mu, often typed as u. Some reports also write it as mcmol/L.
Does this calculate GFR?
No. It only converts the unit. Kidney-function estimates need a validated equation and a clinician to interpret them.
Reference information, not medical advice
This page converts units only. It does not interpret a result, and units and reference intervals differ between laboratories. Ask the clinician who ordered the test or the reporting laboratory what a result means for you. If you are worried about a result or symptoms, contact a health professional; in an emergency call your local emergency number.