Colourists and barbers
Hair colour mixing ratio calculator.
Set the ratio from the colour line you use, tell it how much colour you have or how much mix you need, and read off the grams of developer.
Developer = colour x developer parts / colour parts. At 1:2, 60 g of colour needs 120 g of developer for a 180 g mix. At 1:1 it needs 60 g.
Your numbers
Result
Using the ratio
A ratio of 1:2 means one part colour to two parts developer, by weight. Mixing by weight on a scale is more repeatable than by eye, and it makes the cost of each application easy to track.
Choose either the colour you have (a full tube, say) or the total mix a service needs; if you fill in the total, the colour weight is ignored. The waste allowance covers what stays in the bowl and brush so your cost per client is not understated.
The correct ratio and developer strength come from the colour manufacturer for the specific line and the result wanted, so this tool leaves both to you. Price the service itself with the salon service price calculator.
Everything runs in your browser. Nothing you type is sent or stored.
How a ratio becomes grams
A ratio such as 1:2 is written colour:developer. The tool works in weight:
- Developer = colour × developer parts ÷ colour parts.
- Total mix = colour + developer.
- If you enter a total mix, colour = total × colour parts ÷ (colour parts + developer parts), and the colour weight field is ignored.
- Cost = weight used, plus the waste allowance, × price ÷ package weight, for colour and developer separately.
Worked examples
| Ratio | Input | Colour | Developer | Total |
|---|---|---|---|---|
| 1:1 | 60 g colour | 60 g | 60 g | 120 g |
| 1:1.5 | 100 g total mix | 40 g | 60 g | 100 g |
| 1:2 | 60 g colour | 60 g | 120 g | 180 g |
For costing, take the 1:2 case with a 60 g tube at $11, a 1,000 g bottle of developer at $14 and a 10% waste allowance. Colour costs 60 × 1.1 × $11 ÷ 60 = $12.10, developer costs 120 × 1.1 × $14 ÷ 1,000 = $1.85, and the product cost per application is $13.95. Note how little the developer contributes: the colour is nearly all of the cost, so a change in tube price matters far more than a change in developer price.
Ounces, millilitres and grams
People often search for how many millilitres are in two ounces of developer. The calculator works in grams, so be careful which ounce you mean. One US fluid ounce is 29.5735 mL, so 2 fl oz is about 59.1 mL. One ounce of weight is 28.3495 g, so 2 oz by weight is about 56.7 g. These are not interchangeable, and a liquid’s weight depends on its density, so a bowl marked in fluid ounces or millilitres will not tell you grams exactly. If you mix by volume, weigh a sample on your scale once to check how it compares, or simply mix by weight, which is what this tool assumes.
Choosing the ratio
The correct ratio and developer strength come from the colour manufacturer for the specific line and the result wanted. Printed ratios such as 1:1, 1:1.5 and 1:2 are common, but the same ratio does not suit every product: some lines specify a different ratio for gray coverage than for lift, and lighteners, toners and demi-permanent products often differ. Developer volume (strength) is a separate choice from the ratio and is also set by the product instructions. This tool takes whatever ratio you enter and does not judge it.
Safety and scope
Health Canada says permanent and semi-permanent hair dyes must carry instructions for a patch test, a warning that the product may cause skin irritation in certain individuals, and a warning not to use it to dye eyebrows and eyelashes. The patch test should be repeated before each use, because sensitivity can develop over repeated use. The FDA likewise advises a patch test every time before dyeing hair and following the directions on the label. This calculator does not replace those instructions, does not cover bleach or lightener timing and does not tell you whether a product suits a client.
Common mistakes
- Measuring parts by eye. Weigh both components. Bowl markings and bottle marks vary, and weighing gives the same ratio every time.
- Entering both colour and total mix. If total is filled in, the colour weight is ignored.
- Using the ratio of a different product. Follow the maker’s instructions for each line.
- Costing only the tube. Include developer, and a waste allowance for what stays in the bowl and brush.
- Not mixing a little extra and then discarding it. Mixed colour cannot be saved, so weigh what you need, but include realistic waste in your cost.
To price the service the colour goes into, use the salon service price calculator; to cost everything else you use per client, try the supply cost per service calculator.
FAQ
How much developer do I need for a 1:2 mix?
Twice the weight of the colour. For 60 g of colour you need 120 g of developer.
What is the right colour to developer ratio?
It depends on the colour line, so follow the manufacturer's instructions for that product. This calculator takes whatever ratio you enter.
Why mix by weight?
Weighing gives the same ratio every time and lets you cost each client's colour. Volume markings on bowls vary.
How do I calculate a 1:1.5 mix?
Multiply the colour weight by 1.5 to get the developer. With 40 g of colour you need 60 g of developer; if you know the total mix, such as 100 g, colour is 100 × 1 ÷ 2.5 = 40 g.
How much is 2 oz of developer in ml?
Two US fluid ounces is about 59.1 mL (29.5735 mL per fluid ounce). Two ounces by weight is about 56.7 g (28.3495 g per ounce). They measure different things, so mix by weight if the instructions are in grams.
How do I work out the product cost of a colour application?
Enter the tube price and weight and the developer bottle price and weight. The calculator multiplies each weight used, plus your waste allowance, by price per gram. For 60 g of colour at 1:2 with 10% waste, product cost is $13.95 using the default prices.
Do I need a patch test?
Health Canada says permanent and semi-permanent hair dyes carry patch test instructions and that the test should be repeated before each use; the FDA advises a patch test every time before dyeing hair. Follow the label of the product you are using.
Does this calculator pick the developer strength?
No. Strength (volume) and ratio both come from the manufacturer's instructions for the product and the result you want. This tool only does the arithmetic once you have chosen them.
Sources
Retrieved October 2026. Where a source blocks automated checks this is noted; figures that no source supports are labelled as your own inputs.
- Health Canada: Hair dyes - patch test instructions, irritation warning and eyebrow/eyelash warning on permanent and semi-permanent dyes
- U.S. FDA: Hair dyes - do a patch test every time before dyeing hair; follow the label directions
- NIST Special Publication 811, Appendix B (conversion factors) - US fluid ounce to millilitre and ounce to gram conversions; ratios and developer strengths come from the manufacturer