Food · Holidays 2026
Ham per person and cooking time.
Pick the ham type, enter the weight and the number of servings you need. You get buying quantity, oven time and the safe internal temperature.
Short answer: USDA FSIS says to buy about 1/3 to 1/2 lb of bone-in ham per serving, or 1/4 to 1/3 lb of boneless. In a 325 °F oven a cooked bone-in whole ham takes 15 to 18 minutes per pound to reheat to 140 °F; a cook-before-eating ham must reach 145 °F with a 3-minute rest.
Your ham
Result
Enter your details and press Calculate.
Two kinds of ham, two targets
The Food Safety and Inspection Service separates hams into those that are ready to eat and those that are not. Fully cooked hams, including whole or half vacuum-packaged hams from a federally inspected plant and canned hams, can be eaten cold. If you reheat one, set the oven no lower than 325 °F and heat to 140 °F. Hams repackaged anywhere other than the processing plant, and leftover cooked ham, are heated to 165 °F instead. Cook-before-eating hams and fresh hams must reach 145 °F with a rest of at least three minutes. The label tells you which one you bought.
How much ham to buy
The FSIS "Quantity to Buy" guidance is per serving of meat: 1/4 to 1/3 pound of boneless ham, or 1/3 to 1/2 pound of bone-in ham. The calculator multiplies your servings by those two numbers to give a range, using the bone-in figures for the bone-in rows and the boneless figures for the boneless rows. It counts servings, not guests: how many servings each guest takes is your call.
Oven time by type
The FSIS timetable assumes a 325 °F oven. The minutes per pound run from 10 to 15 for a vacuum-packed boneless cooked ham up to 35 to 40 for a cook-before-eating shank or butt portion. The dropdown carries every row of the timetable except country ham, which FSIS handles differently: soak it 4 to 12 hours in the refrigerator, boil 20 to 25 minutes per pound, then glaze and brown at 400 °F for 15 minutes. FSIS also says spiral-cut cooked hams are safe to eat cold and are best served cold, because heating sliced hams can dry the meat and make the glaze run.
Worked example
A 12 lb whole bone-in cooked ham, reheated: 12 × 15 = 180 minutes (3 h 00 min) to 12 × 18 = 216 minutes (3 h 36 min) at 325 °F, to 140 °F if it was packaged in a USDA-inspected plant. For 20 bone-in servings, 20 × 1/3 = 6.67 lb to 20 × 1/2 = 10 lb, so a 12 lb ham is enough with leftovers. A 6 lb half cook-before-eating ham is 6 × 22 = 132 to 6 × 25 = 150 minutes; to serve at 5:00 pm after the 3-minute rest it goes in between 2:27 pm and 2:45 pm.
Sources and how this is calculated
Minutes = pounds × the timetable's minutes per pound, low and high. Buy range = servings × the FSIS quantity per serving, in pounds. Retrieved October 26, 2026. If your weight is outside the weight range FSIS lists for that row, the tool flags it as a rougher estimate. A food thermometer, not the timer, tells you when the ham is ready.
Common mix-ups
-
Often assumedEvery ham from the store only needs warming up.
What the source saysFSIS describes two kinds. Fully cooked hams can be eaten cold or reheated, but cook-before-eating and fresh hams must reach 145 °F with a rest of at least three minutes. The label says which kind you have. [1]
-
Often assumedAny cooked ham is safe once it reaches 140 °F.
What the source saysFSIS gives 140 °F for cooked hams packaged in USDA-inspected plants. Cooked ham repackaged anywhere else, and leftover cooked ham, should be heated to 165 °F. [1]
-
Often assumedA spiral-cut ham should be reheated like any other ham.
What the source saysFSIS says spiral-cut cooked hams are safe to eat cold and are best served cold, because heating sliced hams can dry out the meat and make the glaze run. A plant-packaged one must reach 140 °F if you do reheat it. [1]
Checked against these sources on .
Frequently asked questions
How much ham per person should I buy?
USDA FSIS suggests 1/3 to 1/2 pound of bone-in ham per serving and 1/4 to 1/3 pound of boneless ham per serving.
How long do I cook a ham per pound?
At 325 °F the FSIS timetable ranges from 10 to 15 minutes per pound for a vacuum-packed boneless cooked ham to 35 to 40 minutes per pound for a cook-before-eating shank or butt portion. Pick your type in the tool.
What temperature does ham need to reach?
Cook-before-eating and fresh ham: 145 °F with a 3-minute rest. Fully cooked ham from a USDA-inspected plant: 140 °F if you reheat it. Repackaged or leftover ham: 165 °F.
Can I eat a fully cooked ham cold?
Yes. FSIS says whole or half cooked, vacuum-packaged hams from federally inspected plants and canned hams can be eaten cold out of the package.
How should I reheat a spiral-cut ham?
FSIS says spiral-cut cooked hams are safe cold and are best served cold, since heating sliced hams can dry the meat. A plant-packaged one must reach 140 °F if you reheat it.
Does the calculator cover country ham?
No. FSIS gives different steps for country ham: soak, boil, then glaze and brown. Follow the label.
Check the label and the thermometer
Table values were read from the USDA FSIS pages on October 26, 2026. Follow the instructions on your ham package when they differ.