Canadian · Validation
IMEI check digit validator.
Checks whether a 15-digit IMEI (International Mobile Equipment Identity) is well-formed, by verifying its Luhn check digit. Runs entirely in your browser: nothing you type is transmitted anywhere.
Inputs
Result
Enter an IMEI and press Validate.
How the IMEI check digit works
An IMEI is 15 decimal digits: an 8-digit Type Allocation Code (TAC) identifying the device model, a 6-digit serial number, and 1 check digit — defined by GSMA TS.06 ("IMEI Allocation and Approval Guidelines"). The check digit is computed with the same Luhn algorithm used for payment cards under ISO/IEC 7812: starting from the rightmost digit of the first 14 digits and moving left, every second digit is doubled (subtracting 9 if the result exceeds 9), all digits are summed, and the check digit is whatever value makes the total a multiple of 10.
A commonly-used example-format IMEI, 490154203237518, works out to a Luhn sum of 52 over its first 14 digits, so (10 − 2) mod 10 = 8 matches its real trailing check digit. A 16-digit IMEISV (14 digits plus a 2-digit software version, no check digit) is a different format this tool does not check.
What this tool does and doesn’t check
A passing checksum only proves the 15 digits are internally consistent — a well-formed, plausible IMEI. It does not mean the device exists, was ever manufactured, or is clean. This is a free format/checksum check, deliberately distinct from paid blacklist and stolen-device lookup services such as imei.info or CheckMend, which query carrier and GSMA databases to tell you whether a specific device is reported lost, stolen, or blacklisted. If you need that, use one of those services — this tool cannot and does not attempt to answer it. Everything here runs entirely in your browser: nothing you type is transmitted, stored, or logged.
What an IMEI is and how it is built
An International Mobile Equipment Identity (IMEI) is the 15-digit number that identifies a single mobile handset to cellular networks. The first eight digits are the Type Allocation Code (TAC), which identifies the device model and where it came from. The rest is defined by the manufacturer and includes the serial number, and the final digit is a Luhn check digit. Because it describes the hardware rather than the subscriber, the IMEI stays the same when you change SIM card or carrier. That is also why the number is useful for insurance claims, warranty work and reporting a lost phone.
This page only answers one narrow question: are the 15 digits you typed internally consistent? It does that by recomputing the check digit. If you are trying to find out whether a handset is blacklisted, financed or reported stolen, the checksum cannot tell you that, and the FAQ below explains where that information lives.
Worked example, digit by digit
Take the first 14 digits of the well-known example IMEI 490154203237518, which are 49015420323751. Working from the rightmost of those 14 digits and moving left, double every second digit, starting with the rightmost one. When a doubled digit is 10 or more, add its two digits together (the same as subtracting 9).
| Digit (right to left) | 1 | 5 | 7 | 3 | 2 | 3 | 0 | 2 | 4 | 5 | 1 | 0 | 9 | 4 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Doubled? | yes | no | yes | no | yes | no | yes | no | yes | no | yes | no | yes | no |
| Value used | 2 | 5 | 5 | 3 | 4 | 3 | 0 | 2 | 8 | 5 | 2 | 0 | 9 | 4 |
The values add up to 2 + 5 + 5 + 3 + 4 + 3 + 0 + 2 + 8 + 5 + 2 + 0 + 9 + 4 = 52. The check digit is whatever brings the total to the next multiple of 10, so (10 − 52 mod 10) mod 10 = 8. The number ends in 8, so it passes. Now swap the last two digits to get 490154203237581. The first 14 digits are unchanged, so the required check digit is still 8, but the number now ends in 1, and the validator reports it as invalid. That is the kind of single typing slip the check digit exists to catch.
Where to find your IMEI
- Dial
*#06#on most phones, or open the About section in the settings menu on a smartphone. - Look on the handset itself: it is commonly printed on the back, inside the battery compartment, on the SIM tray or near the charging port.
- Dual-SIM phones normally have two IMEIs, one per SIM slot. Check each one separately.
- Devices with no SIM slot or eSIM capability usually have no IMEI at all.
Common mistakes and what this tool does not cover
- 16 digits is not an IMEI. An IMEISV is 16 digits: the first 14 are the same as the IMEI, and two software-version digits replace the check digit. The software version is not part of the Luhn calculation, so this tool does not accept it.
- Typing the serial number instead. The IMEI is not the same as the model number, the manufacturer serial printed on the box, or the Apple/Android serial number. Use the 15-digit value from
*#06#. - Treating a pass as proof the phone is clean. A passing checksum means the digits are consistent. It does not mean the TAC belongs to a real manufacturer, the device exists, or it has never been reported stolen.
- Mixing up IMEI and MEID. A CDMA MEID is a different identifier, written as 14 hexadecimal digits; use the MEID converter for those, and the ICCID decoder for the number printed on the SIM itself.
The same Luhn procedure protects payment card numbers and Canadian SINs, so you can compare it with the Luhn validator or the SIN validator.
Frequently asked questions
How do I check whether an IMEI number is valid?
Enter the 15 digits above and press Validate. The tool recomputes the Luhn check digit from the first 14 digits and compares it with the 15th. A match means the number is well-formed; a mismatch almost always means a digit was mistyped or the number was altered.
Can this tool tell me whether a phone is stolen or blacklisted?
No. This is a format and checksum check that runs in your browser and queries nothing. Carriers can add a stolen phone's IMEI to their Equipment Identity Register and optionally to shared registries, and public lookup services can report whether a device has been reported lost or stolen. Use one of those if you are buying a used phone.
How do I find my phone's IMEI?
Dial *#06# on most phones, or look in Settings under About. It is usually also printed on the handset, inside the battery compartment, on the SIM tray or near the charging port. Dual-SIM phones normally show two IMEIs.
What is the TAC in an IMEI?
The Type Allocation Code is the first eight digits. It identifies the device model and its origin. The remaining digits are manufacturer-defined and include the serial number, with the last digit being the Luhn check digit.
Why does my IMEI validate but the carrier still rejects it?
A valid checksum only proves the digits are internally consistent. A carrier can still refuse a device for reasons the number itself cannot show, such as being reported lost or stolen, being blocked on that network, or not being supported on its bands.
Is a 16-digit number an IMEI?
Not quite. A 16-digit value is an IMEISV, which keeps the first 14 digits of the IMEI and replaces the check digit with a two-digit software version. It has no Luhn digit, so this validator expects the 15-digit form.
Why do some phones have two IMEIs?
Dual-SIM phones normally have two IMEIs, one for each SIM slot, and each should be checked and registered separately if a carrier or insurer asks for it.
Can an IMEI be changed, and is the number I type here stored?
The IMEI is meant to be hard to change, but it can be spoofed with special tools, and in some places, such as the UK, changing one is an offence in some circumstances. Rules differ by country, so this is not legal advice. Nothing you type into this tool is transmitted or stored.