General

Shoe size converter.

Convert shoe sizes between US, UK, and EU sizing for men's and women's shoes.

Advertisement

Inputs

Conversion

Converted sizes

Fill the form and press Convert.

Advertisement

About shoe size conversion

Shoe sizing is not a single global standard — US, UK, and EU sizes each grew out of different measuring traditions (the "barleycorn" for US/UK, and the "Paris point" for EU), so exact equivalents vary slightly between brands and even between shoe styles from the same brand. This converter uses the standard, foot-length-based relationship between the three systems: UK and US sizes both increase by one barleycorn (about 8.5 mm of foot length) per whole size, with US sizes running about one size ahead of UK for men and two ahead for women; EU (Paris point) sizes increase by two-thirds of a centimetre per size.

Because it's derived from foot length rather than copied from any single retailer's chart, it lines up closely with published standards references, though you may still see some brands run half a size differently — when in doubt for a specific pair, check that brand's own chart.

How the converter turns one size into three

Every conversion on this page goes through the UK size. If you enter a UK size it is used as it is. If you enter a US size, the tool subtracts 1 for men’s sizing or 2 for women’s sizing to get the UK size. If you enter an EU size, it first works out the foot length that size implies and then converts that length into a UK size. From the UK size it then builds the other two: US men’s is UK + 1, US women’s is UK + 2, and EU comes from the foot length. Results are rounded to the nearest half size.

The formulas, variable by variable

Wikipedia’s shoe-size article gives the same relationships: UK size is about 3 × foot length in inches minus 23, and the EU size is about 3/2 times the foot length in centimetres plus 2. It also notes that US sizes run one higher than UK for the same men’s shoe, and that many US makers use offsets different from the standard one.

Worked examples

Men’s US 9. UK = 9 − 1 = 8. The foot length implied by UK 8 is (8 + 23) ÷ 3 = 10.33 inches, or 26.25 cm. EU = 1.5 × 26.25 + 2 = 41.4, rounded to 41.5. So a men’s US 9 is UK 8 and EU 41.5.

Women’s US 8. UK = 8 − 2 = 6. Foot length (6 + 23) ÷ 3 = 9.67 inches, 24.55 cm. EU = 1.5 × 24.55 + 2 = 38.8, rounded to 39. A women’s US 8 is UK 6 and EU 39.

EU 42, men’s. The tool works backwards: foot length = (42 − 2) ÷ 1.5 = 26.67 cm = 10.50 inches, so UK = 3 × 10.50 − 23 = 8.5. US men’s is 9.5 and US women’s would be 10.5 for the same shoe.

Notice that a men’s US 9 and a women’s US 10 are the same UK 8 and EU 41.5. That is the usual way to read a “men’s to women’s” shoe size conversion, one size up for the women’s label.

Why published charts disagree

There is no single global formula that every brand follows. UK and US sizes are measured on the shoe’s last, not on the foot, and manufacturers add different amounts of room. Wikipedia notes that many US makers use offsets larger than the standard one and that conversion tables found online often contain obvious errors. Wikipedia notes that the “common” US women’s scale is the men’s size plus 1.5 rather than plus 1, which is why one chart may show a women’s US 8 as UK 5.5 and another, like this tool, as UK 6. Half-size differences between charts are common and are not mistakes in either tool; they reflect different conventions.

There is also a separate, foot-based system called Mondopoint, defined in the ISO 9407 standard. A Mondopoint label such as 280/110 means a foot length of 280 mm and a width of 110 mm, in 5 mm steps for ordinary footwear. Lengths step by 5 mm for casual footwear and 7.5 mm for protective footwear. Because it is based on the foot rather than the maker’s last, it is the most direct way to compare shoes.

Measuring your foot to check a conversion

  1. Stand on a sheet of paper with your heel against a wall and mark the tip of your longest toe.
  2. Measure from the wall to the mark in centimetres. Do this late in the day, when feet are largest, and measure both feet, using the longer one.
  3. Use the foot length in the formulas above, or compare it with the brand’s own chart. If you are between sizes, choose the larger one and consider the shoe’s width.

What this converter does not do

It does not know your width, your arch or the shape of a particular brand’s last, and it does not convert children’s sizes, which use different offsets (a UK children’s size is about 3 times foot length in inches minus 10 according to Wikipedia). For a specific pair, trust the brand’s own chart first and this tool second. Related tools: ring size converter, bra size converter, unit converter, and the child height prediction calculator.

Advertisement

Frequently asked questions

Are US and UK shoe sizes the same?

No. For men’s shoes the US size is one higher than the UK size, so a men’s US 9 is a UK 8. For women’s shoes this converter uses UK + 2, so a women’s US 8 is a UK 6. Some retailers use slightly different offsets, so check the brand chart.

How do I convert a men’s shoe size to women’s?

Add one size when converting the US label from men’s to women’s, so a men’s 9 is about a women’s 10. Both are UK 8 and EU 41.5 in this tool. Wikipedia notes a "common" scale that uses 1.5 instead, which is why charts vary by half a size.

How does EU shoe sizing work?

EU sizes use the Paris point, which is two thirds of a centimetre. The size is roughly 1.5 times the foot length in centimetres plus 2, because the shoe is longer than the foot. A foot of 26.25 cm gives about size 41.4, which this tool rounds to 41.5.

What shoe size is a US 9 in UK and EU?

A men's US 9 converts to UK 8 and EU 41.5. A women's US 9 converts to UK 7 and EU 40. Check the brand's own chart if the shoe is a close fit.

Why does my brand's chart show a different EU size?

Brands build shoes on their own lasts and round to their own steps. A half-size difference between charts is common. Wikipedia also notes that conversion tables found online often contain obvious errors, so use the maker's chart for a specific pair.

What is Mondopoint?

Mondopoint is a shoe-size system defined by ISO 9407 that labels footwear by foot length and width in millimetres. A label of 280/110 means a foot 280 mm long and 110 mm wide. Because it labels the foot rather than the last, it avoids the offsets between UK, US and EU labels.

Can I find my shoe size from my height?

Not reliably. Height and foot length are related, but the relationship varies a lot between people. Measure your foot instead, then convert the length. This tool converts sizes between systems; it does not predict a size from height.

Does this tool cover children's shoe sizes?

No. Children's sizes use different offsets from adult sizes, and this converter is built for adult men's and women's sizing. Use the brand's child chart or measure the foot.

Sources

Primary and reference sources used for this page, each opened and checked in October 2026: