Construction Calculators
Gravel & Aggregate Calculator
Estimate the cubic yards and tons of gravel or crushed stone needed for a driveway, path, or paver base. Density varies a lot by material and compaction, so this gives a loose and a compacted estimate — confirm the exact figure with your supplier before ordering.
Inputs
Gravel needed
Fill the form and press Calculate.
Where the density figures come from
Gravel doesn't have one fixed weight — loose material settles and packs down once it's spread and driven over, so a cubic yard covers less area once compacted, and weighs more per yard as it does. The presets here use the bulk density range reported for gravel: 2,460 to 3,240 lb per cubic yard (1,460–1,920 kg/m³), per the gravel bulk-density figures cited on Wikipedia. The "average" preset (3,000 lb/cu yd, ~1.5 tons) is the round figure most gravel and landscape suppliers quote for a general driveway or path estimate.
Actual weight depends on the specific stone (limestone, granite, river rock all differ), moisture content, and how well it's compacted. Ask your supplier for their material's exact density if you're ordering a large or costly load.
Worked example: 20 ft by 10 ft path at 4 in
Volume = 20 × 10 × (4 ÷ 12) = 66.7 cu ft. With 10% waste and converting to cubic yards: 66.7 ÷ 27 = 2.47, × 1.1 = 2.72 cubic yards. At the average density of 3,000 lb per cubic yard that weighs 8,148 lb, or 4.07 tons. With the loose density (2,460 lb/cu yd) the weight is about 6,682 lb (3.34 tons); compacted (3,240) is about 8,800 lb (4.40 tons).
Sources and method
Checked
A secondary source sets the density range; a supplier ticket is the authority for a real order. Figures as of October 26, 2026.
- Wikipedia, Gravel: bulk density range of roughly 1,460–1,920 kg/m³ (2,460–3,240 lb per cubic yard).
- Weight depends on the stone type, moisture and compaction. Ask your supplier for their load weight before ordering by the ton.
Ordering by volume or by weight
Suppliers sell gravel by the cubic yard or by the ton, and the two are linked by density. If you order by volume, the delivered pile settles once it is spread and compacted, which is why a buffer helps. If you order by the ton, the load is weighed at the pit, so moisture affects what you pay for. Base courses under pavers or driveways are often compacted in lifts, so the finished depth is less than the loose depth you place. Check the depth your project requires, and ask whether the material is crushed angular stone, which locks together and compacts well, or rounded river rock, which does not.
Frequently asked questions
How do I convert cubic yards of gravel to tons?
Multiply cubic yards by the density in pounds per cubic yard, then divide by 2,000. At 3,000 lb per cubic yard, one cubic yard is 1.5 tons.
How deep should a gravel path or driveway be?
This depends on the use and local practice. This tool takes the depth you enter and does not recommend one.
Why are there three density options?
Loose, average and compacted gravel weigh differently per cubic yard. The average figure suits most quick quotes.
Should I add extra for compaction?
Yes. Use the waste field for settling and spillage, then confirm with your supplier.