Developer Tools · Batch checks
Bulk IMEI checker.
Paste a list of IMEIs from an inventory, a repair log or a trade-in sheet. Each row gets a Luhn result, the TAC and a plain reason. Nothing is uploaded or looked up.
Short answer: an IMEI is 15 digits: an 8-digit Type Allocation Code, a 6-digit serial and a Luhn check digit. This page checks the length and the Luhn digit for every row and shows the TAC. It cannot say whether a device is stolen, blacklisted or genuine.
What an IMEI contains
The International Mobile Equipment Identity is defined in 3GPP TS 23.003. Per the Wikipedia summary of that structure, it is 15 digits: 14 digits plus a check digit. The first eight digits are the Type Allocation Code (TAC), which identifies the model and the body that allocated it; the first two digits of the TAC are the Reporting Body Identifier. The next six digits are a serial number chosen by the manufacturer, and the last digit is a Luhn check digit calculated over the first fourteen.
The 16-digit variant, the IMEISV, replaces the check digit with a two-digit software version number. Because it has no check digit, there is nothing to verify, and this tool marks a 16-digit row as Review with that explanation instead of calling it valid or invalid.
What each row result means
Fifteen digits with a correct Luhn digit pass. The reason text shows the TAC so you can group devices by model. Fifteen digits with a wrong last digit fail, and the reason gives the digit that would make it pass, so you can spot a single mistyped digit. A row with fourteen digits fails with the check digit that would complete it, which is useful when the last digit was dropped from a list. Any other length fails, and any character other than digits, spaces, hyphens and slashes fails with a note.
The TAC shown is only the first eight digits. The tool does not carry the GSMA's TAC database, so it cannot say which model a TAC belongs to or whether it is allocated.
Worked example
Take 490154203237518. The first fourteen digits are 49015420323751. Counting from the right of the whole number, every second digit is doubled: the check digit 8 stays, 1 doubles to 2, 5 stays, 7 doubles to 14 and becomes 5, 3 stays, 2 doubles to 4, 3 stays, 0 doubles to 0, 2 stays, 4 doubles to 8, 5 stays, 1 doubles to 2, 0 stays, 9 doubles to 18 and becomes 9, and 4 stays. These values total 60, so it passes, and the TAC is 49015420.
Change the last digit to 9 and the total is 61, so the row fails and the tool tells you the last digit should be 8. Remove the last digit to get 49015420323751 and the row fails as 14 digits with the note that the missing check digit would be 8.
Using the batch controls
Paste one IMEI per line or open a .csv or .txt file up to 5 MB and 50,000 rows. Choose the IMEI column if the file has other fields, such as model, owner or price, and tick the header box to skip row one. Phones with two SIMs have two IMEIs, so a file with an IMEI 1 and IMEI 2 column can be checked in two passes, one per column. The duplicate flag in the results catches the same IMEI listed twice, which matters when you are reconciling stock.
Filter to failures and download them as a short CSV to send back to whoever compiled the list. The export keeps your row numbers, the normalised digits, the status, the reason and the TAC.
Common mistakes
Excel turns a 15-digit number into scientific notation or rounds the last digits to zero, because it keeps only 15 significant digits and then displays them badly. Always format an IMEI column as text before pasting. Another mistake is entering the serial number printed on the box in place of the IMEI; they are different identifiers. And do not assume a pass means the phone is clean: a stolen device still has a perfectly valid IMEI.
What this tool does not do
It does not query the GSMA IMEI database, any carrier or any national blacklist, so it cannot tell you whether a device is reported lost, stolen, financed or blocked. It does not verify that a TAC is allocated. It does not identify the model. It is a format and checksum test and nothing more. For one IMEI with the full calculation, use the IMEI validator.
Privacy
Device lists can reveal stock and customers. The page checks them inside a sandboxed frame with no network access, stores nothing in cookies or local storage, and the only output is a CSV you download.
Common mix-ups
-
Often assumedThe check digit is sent over the network with the IMEI.
What the source says3GPP TS 23.003 says the check digit is not part of the digits transmitted when the IMEI is checked. It is meant to catch manual transmission errors, for example when a customer registers a stolen phone at an operator's desk. The spare digit is set to zero when the phone transmits it. [1]
-
Often assumedA 16-digit IMEISV has a check digit like a 15-digit IMEI.
What the source saysTS 23.003 defines the IMEISV as an 8-digit TAC, a 6-digit serial number and a 2-digit software version number, and says the check digit is not applied to the software version number. [1]
Checked against these sources on .
Frequently asked questions
How long is an IMEI?
15 digits: an 8-digit TAC, a 6-digit serial number and a Luhn check digit.
What is the TAC?
The Type Allocation Code, the first eight digits. It identifies the device model and the allocating body. This tool shows it but does not look it up.
Why is a 16-digit number marked Review?
It is an IMEISV, which has a two-digit software version in place of the check digit. There is no check digit to verify.
What if my list is missing the last digit?
A 14-digit row fails, and the reason tells you the check digit that would complete it.
Can it tell me if a phone is stolen?
No. It does not contact the GSMA database or any carrier. A stolen phone has a valid IMEI.
Why does my spreadsheet change my IMEIs?
Excel can show long numbers in scientific notation and loses precision beyond 15 digits. Format the column as text before you paste the list.
How many IMEIs can I check?
Up to 50,000 rows from a file of up to 5 MB.
Is my inventory uploaded?
No. The list is processed in your browser inside a frame with no network access.
Sources
Retrieved
Format check only — not a lookup
This page tests whether each value is structurally valid under the published rule. It does not contact any registry, bank, carrier or issuer, and a pass does not show that a number was issued, is active or belongs to anyone. Your list is processed in your browser and is not uploaded.