Canada · Cheques · MICR line

Canadian cheque MICR line decoder.

The numbers along the bottom of a Canadian cheque, field by field, from Payments Canada Standard 006.

Short answer: The MICR line on a Canadian cheque uses the E-13B font, 14 characters (10 digits and 4 symbols). Left to right it holds an optional serial number, the 11-space transit field (a 5-digit branch, a dash and a 3-digit institution number) and the on-us field, which has a transaction code of up to 4 digits and the account number. Payments Canada Standard 006 defines no check digit. Code 45 marks U.S. dollar items.

Source: Payments CanadaRetrieved November 9, 2026Last updated November 9, 2026Unofficial guide

Advertisement

Decode a MICR line

The cheque number, if printed. Use made-up numbers to try it. Runs in your browser; nothing is sent.
On-us field, before the account number.
Digits, with dashes or blanks as your institution specifies.

Result

Press Decode to see each field.

Advertisement

The fields of a Canadian MICR line

Payments Canada's Standard 006 sets out the machine-readable line printed in the bottom 1.59 cm of a cheque. The machine language is E-13B, fourteen characters: ten digits and four symbols (transit, on-us, amount and dash). The line is divided into fields, measured from the right edge of the document.

Field (reading right to left)Standard 006 rule
Amount fieldNormally blank when the cheque is printed
On-us fieldUp to 18 spaces: a transaction code section (blank or at most 4 digits) and the account number, which must be preceded by an on-us symbol
Transit number fieldAlways 11 spaces; opens and closes with the transit symbol; the institution number (3 digits) and the branch number (5 digits) separated by a dash
Serial number fieldVariable length, at most 14 characters: 12 digits plus 2 on-us symbols; highly recommended but not mandatory

Transaction codes

Standard 006 and its Appendix VII list the paper transaction codes reserved for use by the Canadian Payments Association, now Payments Canada. Transaction code 45 is encoded on all U.S. dollar items drawn on a U.S. dollar account, with listed exceptions; code 05 is reserved for future use.

CodePayment type
28Returned item carrier envelopes
33Business pre-authorized debits (PADs)
44Cash management PADs
45U.S. dollar items
81Gift certificates and store coupons
83Funds transfer PADs where no recourse is provided
96Bill payment remittances

What changed from earlier years

Standard 006 is an older document: its sections are dated between 2006 and 2017 and the PDF was last saved in 2024, and it still uses the Canadian Payments Association name. Some institutions were temporarily exempt from using code 45 and used their own codes, for example 11, 90, 644 and 6404 for certain credit union and Desjardins items, so an unfamiliar code is not necessarily an error.

Worked example

A cheque with serial number 000123, branch 12345, institution 003, transaction code 45 and account 1234567 reads, left to right: serial 000123, transit 12345-003, then the on-us field with code 45 (a U.S. dollar item) and the account number. A branch number of only four digits (1234) fails because the transit field needs five digits for the branch and three for the institution. Reading the transit field right to left gives the institution first, as the standard describes it.

Common mix-ups

  • The transit number is branch first on the cheque. Standard 006 describes the field reading right to left as institution then branch, so printed left to right it is the 5-digit branch, a dash and the 3-digit institution.
  • There is no check digit in the standard. Standard 006 defines field layout only. This tool cannot confirm that an account exists.
  • The cheque number is not part of the account number. The serial field sits to the left of the transit field; the account is in the on-us field.
  • A transaction code is not always present. The section can be blank or up to 4 digits.
  • Electronic transfers use a different layout. Standard 006 covers the cheque line, not the bank details form used for direct deposit.

Method

The decoder checks that the branch is exactly 5 digits, the institution exactly 3, the transaction code blank or up to 4 digits, the serial at most 12 digits and the account only digits, dashes and blanks. It then lists the fields in the order they are printed and looks the code up in the Appendix VII list. It does not validate a bank's existence: use the transit lookup for institution and branch names. Figures were read from Standard 006 on November 9, 2026.

What this does not cover

Figures read from the sources below on November 9, 2026. Last updated November 9, 2026.

Sources

Advertisement

Frequently asked questions

What is the MICR line on a Canadian cheque?

The line of E-13B characters printed along the bottom edge holding the serial number, transit number and on-us (account) information.

What is the transit number on a Canadian cheque?

An 11-space field holding a 5-digit branch number, a dash and a 3-digit institution number, between transit symbols.

What does transaction code 45 mean?

It is encoded on U.S. dollar items drawn on a U.S. dollar account, with exceptions listed in Standard 006.

Is there a check digit in a Canadian MICR line?

Standard 006 does not define one for these fields.

How long can the serial number be?

At most 14 characters: twelve digits plus two on-us symbols.

Where is the account number?

In the on-us field, after the transaction code section and preceded by an on-us symbol.

Does this page send my numbers anywhere?

No. The decoder runs in your browser and nothing is transmitted. Use made-up numbers for practice.

Privacy note

This page is general information from an unofficial guide, not banking advice. Do not enter a real account number you are not comfortable having on screen; use made-up numbers. Nothing you type is sent anywhere.