Health Calculators

Warm up sets calculator.

Enter the weight you plan to work with and the bar you load it on. You get a ramp of lighter sets rounded to your plates, so you stop doing the arithmetic between sets. Runs in your browser; nothing is sent or stored.

Advertisement

Your lift

The weight of your first work set.
20 kg or 45 lb for a standard barbell. Use 0 for dumbbells or a machine.
Twice your smallest plate: 2.5 kg for 1.25 kg plates, 5 lb for 2.5 lb plates.

Warm-up sets

Fill the form and press Build my warm-up.

Advertisement

How the warm-up is built

  1. Pick the ramp. The standard ramp is 40% for 5 reps, 60% for 3, 80% for 2 and 90% for 1 of your working weight. The short ramp is 50% for 5, 70% for 3 and 85% for 1.
  2. Optional empty-bar set. A first set of 10 reps with the bar alone, to groove the movement.
  3. Round to your plates. Each percentage is rounded to the nearest jump you can actually load. A set is dropped if it rounds to the bar, to the set before it, or to the working weight.

Worked example. Working weight 140 kg on a 20 kg bar, 2.5 kg jumps, standard ramp with the empty bar: 20 kg × 10, 55 kg × 5, 85 kg × 3, 112.5 kg × 2, 125 kg × 1. The exact 40% is 56 kg, which rounds to 55 kg; 60% is 84 kg, which rounds to 85 kg; 80% is 112 kg, which rounds to 112.5 kg; 90% is 126 kg, which rounds to 125 kg. The ramp adds up to 21 warm-up reps and 1,080 kg of total load moved.

More worked examples

  1. In pounds. 225 lb on a 45 lb bar in 5 lb jumps, short ramp with the empty bar: 45 lb × 10, 115 lb × 5, 160 lb × 3, 190 lb × 1.
  2. A light working weight. 60 kg on a 20 kg bar, standard ramp: 20 kg × 10, 25 kg × 5, 35 kg × 3, 47.5 kg × 2, 55 kg × 1. The 40% set rounds to 25 kg and the 60% set to 35 kg, and the last set stays well under the working weight, so nothing is dropped.

This is a convention, not a rule

No study sets the correct warm-up percentages, and coaches disagree. The ramp here is a common pattern: light sets for more reps, heavier sets for fewer, finishing below the working weight so the warm-up does not cost you the work sets. One published coaching answer from Barbell Medicine says they use no percentages or hard cut-off for warm-ups, and suggest roughly 3 to 5 warm-up sets evenly spaced from the empty bar to the working weight. That is a different recipe that lands in a similar place. If your ramp has worked for you for years, keep it.

Heavier working weights justify more warm-up sets and lighter ones need fewer. For a working weight near the bar, the empty bar plus one or two sets is plenty. For a heavy single or a max attempt, lifters usually add more steps near the top; this page does not model max attempts.

What this calculator does not do

It does not judge how heavy your working weight should be, prescribe sets for a competition, or account for injuries or mobility work. Warm-ups for different lifts differ: a deadlift ramp and a bench ramp usually start from different places. Use the percentages as a starting point and adjust to how the bar feels.

Advertisement

FAQ

How many warm-up sets should I do?

There is no fixed number. The ramp on this page has 3 or 4 sets plus an optional empty-bar set, and a coach quoted on this page recommends 3 to 5 evenly spaced sets. Lighter working weights need fewer and heavy ones need more.

Should warm-up sets go to failure?

No. Warm-up reps should feel easy and the reps drop as the weight rises, so you arrive at your first work set prepared but not tired. That is why the ramp tops out at 85 to 90% for a single or a double.

Why does the calculator round my weights?

You can only load what your plates allow. Enter the smallest jump you can make and every set is rounded to the nearest loadable weight. The rounded set can be slightly above or below the exact percentage.

Why was one of my sets removed?

A set is dropped if it rounds to the bar, to the previous set, or to the working weight. With a light working weight or large jumps, two percentages can land on the same load, and repeating a weight adds nothing.

Do I need the empty-bar set?

It is optional. A set of 10 with the bar alone is a common habit for rehearsing the movement. A Barbell Medicine coach says the empty-bar sets do not matter much, so skip it if your own routine already covers it.

Does this work for dumbbells or machines?

Yes. Set the bar weight to 0 and the smallest jump to what your dumbbell rack or stack allows. The percentages apply to whatever you will lift in your first work set.

Sources

The warm-up percentages on this page are a coaching convention rather than a research result, so there is no primary source for them. One coaching source that was opened and checked, retrieved October 2026 (2026-10-26).

Disclaimer

Educational estimate, not medical advice. This calculator gives a general strength-training pattern, not a program or coaching. Use a spotter or safety arms for heavy lifts and stop if you feel pain. See a qualified health professional if you have an injury or a medical condition.